ATF15XXDK3-SAA100 Atmel, ATF15XXDK3-SAA100 Datasheet - Page 32

ADAPTER SKT ATF15XXB PLCC/TQFP

ATF15XXDK3-SAA100

Manufacturer Part Number
ATF15XXDK3-SAA100
Description
ADAPTER SKT ATF15XXB PLCC/TQFP
Manufacturer
Atmel
Datasheet

Specifications of ATF15XXDK3-SAA100

Module/board Type
Socket Module - TQFP
For Use With/related Products
ATF15xxDK3
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
ATF15xx-DK3 Development Kit User Guide
1. To create a new chain file, the ATMISP Software first needs to be launched either
Note:
2. To create a new chain file, select the New command under the File menu or click
3. The first piece of information that the software asks for when creating a new
4. Next you will need to specify the properties of each JTAG device in the Device
5. In the JTAG Instruction field, you can specify which JTAG instruction to be exe-
6. The next step is to specify the JEDEC file to be programmed into the target
through the Program Chip button in the ProChip Designer window, the ATMISP
desktop icon or the Start > Programs > Atmel-ISP menu.
on the New shortcut button.
chain is the number of devices in the JTAG chain. Therefore, enter “1” and then
click OK since you will be programming a single-device JTAG chain.
Properties window. First, you will need to select the target device type of the first
device in the JTAG chain. For this tutorial, please select ATF1502BE as the tar-
get device type.
cuted on this device in the chain. Please select Program/Verify to program and
verify the ATF1502BE.
device in the JEDEC File field. Click on the Browse button, change the directory
to ..\PROCHIP\DESIGNS\VHDL and then select F02_44TQFP.JED as the
If ATMISP is launched through ProChip Designer, then the appropriate chain
(.CHN) file will be automatically created by ProChip Designer. Therefore, steps
2 through 6 can be skipped.
(3) Enter the
number of
devices
(2) Create new
chain file
(1) Launch
CPLD Design Flow Tutorial
ATMISP
3605B–PLD–05/06
3-11

Related parts for ATF15XXDK3-SAA100