VDIP2 FTDI, Future Technology Devices International Ltd, VDIP2 Datasheet

MOD MCU-USB HOST CTLR 40-DIP

VDIP2

Manufacturer Part Number
VDIP2
Description
MOD MCU-USB HOST CTLR 40-DIP
Manufacturer
FTDI, Future Technology Devices International Ltd
Series
Vinculumr
Datasheet

Specifications of VDIP2

Main Purpose
Interface, USB 2.0 Host/Controller
Embedded
Yes, ASIC
Utilized Ic / Part
VNC1L-1A
Primary Attributes
Dual A-Type Connector, UART / Parallel FIFO / SPI Interfaces
Secondary Attributes
Firmware Update via USB Flash Drive or UART, Traffic LEDs
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
768-1002
Future Technology Devices International Ltd.
VDIP2
Vinculum VNC1L Module
Datasheet
Document Reference No.: FT_000017
Version 1.0
Issue Date: 2010-03-08
Future Technology Devices International Ltd (FTDI)
Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow, G41 1HH, United Kingdom
Tel.: +44 (0) 141 429 2777
Fax: + 44 (0) 141 429 2758
E-Mail (Support):
support1@ftdichip.com
Web:
http://www.vinculum.com
Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced
in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are
supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology
Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your
statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in
which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminar y
information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by
the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park,
Glasgow, G41 1HH, United Kingdom. Scotland Registered Number: SC136640
Copyright © 2010 Future Technology Devices International Limited

Related parts for VDIP2

VDIP2 Summary of contents

Page 1

... No freedom to use patents or other intellectual property rights is implied by the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow, G41 1HH, United Kingdom. Scotland Registered Number: SC136640 Copyright © 2010 Future Technology Devices International Limited VDIP2 Datasheet Document Reference No.: FT_000017 Version 1.0 ...

Page 2

... The VDIP2 module is an MCU to embedded USB host controller development module for the VNC1L I.C. device.The VDIP2 is supplied on a PCB designed to fit into a 40 pin DIP socket, and provides access to the UART, parallel FIFO, and SPI interface pins on the VNC1L device, via its AD and AC bus pins. All other Vinculum I/O pins are also accessable ...

Page 3

... Contact Information ...................................................... 19 Appendix A – References ................................................................. 20 Appendix B – List of Figures and Tables .......................................... 21 List of Figures ................................................................................. 21 List of Tables ................................................................................... 21 Appendix C – Revision History ......................................................... 22 Copyright © 2009 Future Technology Devices International Limited VDIP2 Vinculum VNC1L Module Datasheet Version 1.0 Table of Contents Document Reference No.: FT_000017 Clearance No.: FTDI# 145 2 ...

Page 4

... Auxiliary 3 200 mA power output to external logic. Copyright © 2009 Future Technology Devices International Limited VDIP2 Vinculum VNC1L Module Datasheet Version 1.0 : Program or update firmware via USB Flash disk or via UART/Parallel FIFO/SPI interface Power and traffic indicator LED’s ...

Page 5

... Pin Out and Signal Description 3.1 Module Pin Out Figure 3.1 – VDIP2 Module Pin Out (Top View) Copyright © 2009 Future Technology Devices International Limited Document Reference No.: FT_000017 VDIP2 Vinculum VNC1L Module Datasheet Version 1.0 Clearance No.: FTDI# 145 4 ...

Page 6

... LED on board the PCB also brought out onto this pin which allows for the possibility of bring- ing out an additional LED traffic indicator out of the VDIP2 board. For example, if the VDIP2 USB connector is brought out onto an instrument front panel, an activity LED could be mounted along side it. ...

Page 7

... BD bit 2 I/O 5V safe bidirectional data / control bus, BD bit 3 I/O 5V safe bidirectional data / control bus, BD bit 4 PWR Output 3.3V output from VDIP2’s on board 3.3V L.D.O. PWR Output 3.3V output from VDIP2’s on board 3.3V L.D.O. No Connect Clearance No.: FTDI# 145 6 ...

Page 8

... Two three way jumper pin headers are provided to allow for simple configuration of the I/O on data and control bus pins of the VDIP2. This is done by a combination of pulling up or pulling down the VNC1L ACBUS5 (pin 46) and ACBUS6 (pin 47). The relevant portion of the VDIP2 module schematic is shown in Figure 3.2 Figure 3.2 – ...

Page 9

... AC3 I/O 28 ACBUS4 AC4 I/O Table 3.3 - Default Interface I/O Pin Configuration Copyright © 2009 Future Technology Devices International Limited VDIP2 Vinculum VNC1L Module Datasheet Version 1.0 Data and Control Bus Configuration Options Description UART Interface 5V safe bidirectional data / control bus, ...

Page 10

... TXDEN# Input Table 3.4 - Default I/O Pin Configuration – UART Interface Copyright © 2009 Future Technology Devices International Limited VDIP2 Vinculum VNC1L Module Datasheet Version 1.0 Type Transmit asynchronous data output Receive asynchronous data input Request To Send Control Output / Handshake signal ...

Page 11

... Remember that CS must be held low for at least one clock period before being taken high again to continue with the next read or write cycle. Copyright © 2009 Future Technology Devices International Limited VDIP2 Vinculum VNC1L Module Datasheet Version 1.0 Table 3.5 Name Type ...

Page 12

... Remember that CS must be held low for at least one clock period before being taken high again to continue with the next read or write cycle. Copyright © 2009 Future Technology Devices International Limited Document Reference No.: FT_000017 VDIP2 Vinculum VNC1L Module Datasheet Version 1.0 Clearance No.: FTDI# 145 11 ...

Page 13

... Table 3.6 - SPI Slave Data Timing Time Description 0 RXF# 1 TXE RXF IRQEn 5 TXE IRQEn Table 3.7 - SPI Slave Status Register (ADD=’1’) Copyright © 2009 Future Technology Devices International Limited Document Reference No.: FT_000017 VDIP2 Vinculum VNC1L Module Datasheet Version 1.0 Min Typical Max Unit - - ...

Page 14

... WR INPUT Table 3.8 - Default Interface I/O Pin Configuration Option – Paralle FIFO Interface Copyright © 2009 Future Technology Devices International Limited VDIP2 Vinculum VNC1L Module Datasheet Version 1.0 Type FIFO Data Bus Bit 0 FIFO Data Bus Bit 1 FIFO Data Bus Bit 2 ...

Page 15

... Valid Data Hold Time from RD# Inactive* T5 RD# Inactive to RXF# T6 RXF# Inactive After RD# Cycle Table 3.9 FIFO Read Cycle Timing * Load = 30pF Copyright © 2009 Future Technology Devices International Limited Document Reference No.: FT_000017 VDIP2 Vinculum VNC1L Module Datasheet Version 1.0 Min Max Unit ...

Page 16

... T10 Data Hold Time from WR Inactive* T11 WR Inactive to TXE# T12 TXE# Inactive After WR Cycle Table 3.10 - FIFO Write Cycle Timing Copyright © 2009 Future Technology Devices International Limited Document Reference No.: FT_000017 VDIP2 Vinculum VNC1L Module Datasheet Version 1.0 Min Max Unit ...

Page 17

... UART, FIFO, SPI or USB interface command monitor. 4.1.2 Firmware Upgrades The VDIP2 module is supplied pre-loaded with the VDAP firmware. There are two methods of upgrading the firmware on the VDIP2. These methods are described in a Vinculum Firmware manual please refer to:- http://www.vinculum.com/documents/fwspecs/UM_VinculumFirmware_V205.pdf Copyright © 2009 Future Technology Devices International Limited Document Reference No ...

Page 18

... Mechanical Dimensions Figure 5.1 VDIP2 Dimensions (Top View) Figure 5.2 VDIP2 Dimensions (Side View) Copyright © 2009 Future Technology Devices International Limited Document Reference No.: FT_000017 VDIP2 Vinculum VNC1L Module Datasheet Version 1.0 Clearance No.: FTDI# 145 17 ...

Page 19

... Schematic Diagram Figure 6.1 - Schematic Diagram Copyright © 2009 Future Technology Devices International Limited Document Reference No.: FT_000017 VDIP2 Vinculum VNC1L Module Datasheet Version 1.0 Clearance No.: FTDI# 145 18 ...

Page 20

... Please visit the Sales Network page of the FTDI Web site for the contact details of our distributor(s) and sales representative(s) in your country. Copyright © 2009 Future Technology Devices International Limited Document Reference No.: FT_000017 VDIP2 Vinculum VNC1L Module Datasheet Version 1.0 Clearance No.: FTDI# 145 19 ...

Page 21

... Appendix A – References http://www.vinculum.com/documents/fwspecs/UM_VinculumFirmware_V205.pdf Copyright © 2009 Future Technology Devices International Limited Document Reference No.: FT_000017 VDIP2 Vinculum VNC1L Module Datasheet Version 1.0 Clearance No.: FTDI# 145 20 ...

Page 22

... Appendix B – List of Figures and Tables List of Figures Figure 1.1- VDIP2 ......................................................................................................................... 1 Figure 3.1 – VDIP2 Module Pin Out (Top View) ................................................................................. 4 Figure 3.2 – VDIP2 On-Board Jumper Pin Configuration. ................................................................... 7 Figure 3.3 – SPI Slave Data Read Cycle. ........................................................................................ 10 Figure 3.4 – SPI Slave Data Write Cycle. ....................................................................................... 11 Figure 3.5 – ...

Page 23

... Version 1.0 Datasheet Updated (Reformatted) Datasheet Updated (Mechanical Drawings) Added Appendix A and B Added schematic Copyright © 2009 Future Technology Devices International Limited Document Reference No.: FT_000017 VDIP2 Vinculum VNC1L Module Datasheet Version 1.0 Clearance No.: FTDI# 145 March 2007 April 2007 08 March 2010 22 ...

Related keywords