STEVAL-PCC009V3 STMicroelectronics, STEVAL-PCC009V3 Datasheet - Page 9

• Manufacturer Part Number: STEVAL-PCC009V3
• Description: BOARD EVAL S-TOUCH STM32
• Manufacturer: STMicroelectronics

Specifications of STEVAL-PCC009V3

• Accessory Type: Interface Board
• Utilized Ic / Part: STM32
• Main Purpose: Interface, Sensor, Capacitive Touch
• Secondary Attributes: USB Powered
• Embedded: Yes, MCU, 32-Bit
• Primary Attributes: Interface Board for STEVAL-ICB002V1
• Product: Power Management Modules
• For Use With/related Products: STEVAL-ICB002V1
• Lead Free Status / RoHS Status: Lead free by exemption / RoHS compliant by exemption
• Other names: 497-10173

UM0868
3
Working in DFU mode
The required DFU setup (DFuSe) is available for download from the STMicroelectronics web
site at http://www.st.com/mcu/familiesdocs-110.html, under section “Software-PC”.
After installing the setup, plug in the board. When the PC prompts for a driver, follow the
path: Program Files\STMicroclectronics\DFUSe\Driver, and select the driver
The user manual for the DFU GUI is available at the same link.
To work in DFU mode, remove the mini USB cable from the STM32-based interface board
and power it down.
Short pin 9 and 11 of J4 by connecting the 2-pin jumper mounted on J4 of the STEVAL-
PCC009V3 board. Then, connect the mini USB cable. At this point the board should be
enumerated and listed in the device manager window, as shown in
occur, please contact the technical support.
Figure 5.
Enumeration in DFU mode
Doc ID 16826 Rev 1
Figure
Working in DFU mode
5. If this does not
9/17