CP2201EK Silicon Laboratories Inc, CP2201EK Datasheet - Page 50

• Manufacturer Part Number: CP2201EK
• Description: KIT EVAL FOR CP2201 ETH CTRLR
• Manufacturer: Silicon Laboratories Inc
• Type: Controllers & Processorsr

Specifications of CP2201EK

• Main Purpose: Interface, Ethernet Sensor
• Embedded: Yes, MCU, 8-Bit
• Utilized Ic / Part: CP2200, CP2201
• Primary Attributes: Temperature and Light Sensor
• Secondary Attributes: Graphic User Interface
• Interface Type: Ethernet
• Product: Modules
• Silicon Manufacturer: Silicon Labs
• Silicon Core Number: CP2201
• Silicon Family Name: CP220x
• Kit Contents: CP2201 Evaluation Board, Power Adapter, CAT5e Ethernet Cable, CD-ROM, Quick-Start Guide
• For Use With/related Products: CP2201
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 336-1316

CP2200/1
50
47-32
19-16
15-0
Bit
51
50
49
48
31
30
29
28
27
26
25
24
23
22
21
20
Transmitted VLAN Frame
Back Pressure Applied
Transmitted PAUSE Frame
Transmitted Control Frame
Total Bytes Transmitted
Transmit Under-Run
Jumbo Packet Detected
Late Collision Detected
Excessive Collisions Detected
Excessive Delay Detected
Delay Detected
Transmitted Broadcast Packet
Transmitted Multicast Packet
Transmit Successful
Type Field Detected
Length Check Error
CRC Error
Transmit Collision Count
Transmit Byte Count
Field Name
Table 15. Transmit Status Vector Description
Last frame transmitted had length/type field of 0x8100 (VLAN
protocol Identifier).
Back pressure was applied during transmission.
Last frame transmitted was a valid PAUSE control frame.
Last frame transmitted was a control frame.
Number of bytes transmitted on wire including all bytes from
collided attempts.
Last packet was aborted due to a data under-run condition.
Last packet was aborted due to the detection of a Jumbo
packet (oversized frame). Jumbo packets are not supported.
Last packet was aborted due to a collision occurring after the
51.2 µs collision window.
Last packet was aborted due to detection of 16 or more colli-
sions.
Aborted due to a delay longer than 2.42ms.
Last packet was transmitted, but had delay (less than 2.42
ms).
Last packet transmitted had a broadcast destination address.
Last packet transmitted had a multicast destination address.
Last packet was successfully transmitted.
Last packet’s length/type field had a value greater than 1500.
Last packet’s length/type field had a value less than or equal
to 1500 which did not match the actual frame length.
Last packet’s CRC field did not match the internally generated
CRC.
Number of collisions encountered during transmission of the
last packet.
Number of bytes in last frame not counting collided bytes.
Rev. 1.0
Description