DV164122 Microchip Technology, DV164122 Datasheet - Page 103

• Manufacturer Part Number: DV164122
• Description: ANALYZER SRL PICKIT W/DEMO BOARD
• Manufacturer: Microchip Technology
• Series: PICkit™r
• Type: MCUr

Specifications of DV164122

• Contents: PICkit™ Serial Analyzer, 28-pin Demo Board, USB Cable, and Software with Documentation CD
• Processor To Be Evaluated: PIC16F886
• Interface Type: USB
• Silicon Manufacturer: Microchip
• Kit Application Type: Interface
• Application Sub Type: USB
• Silicon Family Name: PIC16F
• Kit Contents: PICkit Serial Analyzer, Demo Board, USB Cable, Software
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With/related Products: PIC16F886
• For Use With: PKSERIAL-SPI1 - BOARD DEMO PICKIT SERIAL SPIPKSERIAL-I2C1 - BOARD DEMO PICKIT SERIAL I2C
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: Q3260228

© 2007 Microchip Technology Inc.
10.3.7
Returns:
Inputs:
Description:
10.3.8
Returns:
Inputs:
Description:
10.3.9
Returns:
Inputs:
Description:
10.3.10 PICkitS.Basic.Send_I2CWrite_Cmd(byte p_slave_addr, byte
Returns:
Inputs:
Note:
PICkitS.Basic.Reset_Control_Block()
PICkitS.Basic.Retrieve_USART_Data(uint p_byte_count, ref
byte[] p_data_array)
PICkitS.Basic.Send_I2CRead_Cmd(byte p_slave_addr, byte
p_start_data_addr,byte p_num_bytes_to_read, ref byte[]
p_data_array,ref string p_script_view)
p_start_data_addr,byte p_num_bytes_to_write, ref byte[]
p_data_array,ref string p_script_view)
Read Bytes command.
This function issues the I
then warm Resets while preserving control block contents. Issue this function
call after a read or write failure.
array. p_data_array must be at least p_byte_count in size.
reading
True if successful, False if not
None
Attempts to clear status flags set during a read or write error by issuing cold
Data from USART bus
p_byte_count: number of bytes to read
p_data_array: Reference to an array of bytes
reads a number of bytes from the USART bus and stores them in p_data_array
True if successful, False if not
byte p_slave_addr - I
byte p_start_data_addr - I
byte p_num_bytes_to_read - number of bytes to be returned
byte[] p_data_array - reference to byte array that will store retrieved data
-must be at least as large as p_num_bytes_to_read
string p_script_view - reference to a string to which will be copied a formatted
Attempts to perform I
ful, p_num_bytes_to_read is copied into p_data_array. It is the user’s respon-
sibility to ensure p_data_array has enough room. Regardless of
success or failure, the PICkit ™ status packet is updated after the read attempt
and stored for retrieval by the function Get_Status_Packet.
True if successful, False if not
byte p_slave_addr - I
byte p_start_data_addr - I
byte p_num_bytes_to_write - number of bytes to be written
byte[] p_data_array - reference to byte array that holds data to be written
string p_script_view - reference to a string to which will be copied a formatted
writing to
view of the command
view of the command
PICkit™ Serial Analyzer DLL
2
C Read Bytes Nack Last Byte command, not the I
2
2
2
C slave address of UUT
C slave address of UUT
C read command using above parameters. If success-
2
2
C command code or address of memory to begin
C command code or address of memory to begin
DS51647A-page 97
2
C