ATSTK600 Atmel, ATSTK600 Datasheet - Page 5

• Manufacturer Part Number: ATSTK600
• Description: DEV KIT FOR AVR/AVR32
• Manufacturer: Atmel
• Series: AVR®r
• Type: MCUr

Specifications of ATSTK600

• Processor To Be Evaluated: AVR and AVR32
• Data Bus Width: 8 bit
• Interface Type: RS-232, USB
• Silicon Manufacturer: Atmel
• Core Architecture: AVR
• Core Sub-architecture: AVR UC3
• Silicon Core Number: STK600
• Silicon Family Name: AVR
• Kit Contents: Board
• Rohs Compliant: Yes
• For Use With/related Products: Atmel AVR Devices
• For Use With: ATSTK600-ATTINY10 - STK600-ATTINY10 SOCKET PACKAGE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Contents: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Table 3-12. Command format.
Table 3-13. Answer format if command succeeded.
3.6 CMD_FIRMWARE_UPGRADE
Table 3-14. Command format.
Table 3-15. Answer format.
3.7 CMD_LOAD_RC_ID_TABLE
Field
Command ID
Address
Field
Answer ID
Status
Field
Command ID
Parameter ID
Field
Answer ID
Status
8133A-AVR-04/08
Size
1 byte
4 byte
Size
1 byte
1 byte
Size
1 byte
10 bytes
Size
1 byte
1 byte
For word-addressed memories (program flash), the Address parameter is the word
address.
If bit 31 is set, this indicates that the following read/write operation will be performed
on a memory that is larger than 64KBytes. This is an indication to STK600 that a load
extended address must be executed. See datasheet for devices with memories larger
than 64KBytes.
When the host is trying to connect to the programmer, it checks the firmware version.
A firmware upgrade is initiated if a newer version is available on the PC.
The STK600 can “reboot” into upgrade mode by using this command
If the status returned is STATUS_CMD_OK, the STK600 will disconnect and enter
upgrade mode.
This command sends the Routing Card boardID table to the STK600 FW. Each row in
this table holds first the RC_id, then the SC_id (allowed to use with that RC) and then
the MAX_VTG allowed for that routingcard.
The two first bytes of the table hold the revision of the table. MSB first.
Values
CMD_LOAD_ADDRESS
Values
CMD_LOAD_ADDRESS
STATUS_CMD_OK
Values
”fwupgrade”
Values
CMD_SET_PARAMETER
STATUS_CMD_OK or
STATUS_CMD_FAILED
CMD_FIRMWARE_UPGRADE
Description
Command id
The address, four bytes, MSB first
Description
Answer id
A status value indicating success
Description
Command id
String to enable upgrade mode
Description
Answer id
A status value indicating the result of the
operation
AVR079
5