C8051F005DK Silicon Laboratories Inc, C8051F005DK Datasheet - Page 142

• Manufacturer Part Number: C8051F005DK
• Description: DEV KIT FOR F005/006/007
• Manufacturer: Silicon Laboratories Inc
• Type: MCUr

Specifications of C8051F005DK

• Contents: Evaluation Board, Power Supply, USB Cables, Adapter and Documentation
• Processor To Be Evaluated: C8051F01x
• Interface Type: USB
• Silicon Manufacturer: Silicon Labs
• Core Architecture: 8051
• Silicon Core Number: C8051F005
• Silicon Family Name: C8051F00x
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: Silicon Laboratories C8051 F005/006/007
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1188

Bit7:
Bit6:
Bit5:
Bit4:
Bit3:
Bit2:
Bit1:
Bit0:
R/W
TF1
Bit7
TF1: Timer 1 Overflow Flag.
Set by hardware when Timer 1 overflows. This flag can be cleared by software but is
automatically cleared when the CPU vectors to the Timer 1 interrupt service routine.
0: No Timer 1 overflow detected.
1: Timer 1 has overflowed.
TR1: Timer 1 Run Control.
0: Timer 1 disabled.
1: Timer 1 enabled.
TF0: Timer 0 Overflow Flag.
Set by hardware when Timer 0 overflows. This flag can be cleared by software but is
automatically cleared when the CPU vectors to the Timer 0 interrupt service routine.
0: No Timer 0 overflow detected.
1: Timer 0 has overflowed.
TR0: Timer 0 Run Control.
0: Timer 0 disabled.
1: Timer 0 enabled.
This flag is set by hardware when an edge/level of type defined by IT1 is detected. It can
be cleared by software but is automatically cleared when the CPU vectors to the External
Interrupt 1 service routine if IT1 = 1. This flag is the inverse of the /INT1 input signal’s
logic level when IT1 = 0.
IT1: Interrupt 1 Type Select.
This bit selects whether the configured /INT1 signal will detect falling edge or active-low
level-sensitive interrupts.
0: /INT1 is level triggered.
1: /INT1 is edge triggered.
This flag is set by hardware when an edge/level of type defined by IT0 is detected. It can
be cleared by software but is automatically cleared when the CPU vectors to the External
Interrupt 0 service routine if IT0 = 1. This flag is the inverse of the /INT0 input signal’s
logic level when IT0 = 0.
IT0: Interrupt 0 Type Select.
This bit selects whether the configured /INT0 signal will detect falling edge or active-low
level-sensitive interrupts.
0: /INT0 is level triggered.
1: /INT0 is edge triggered.
IE1: External Interrupt 1.
IE0: External Interrupt 0.
TR1
R/W
Bit6
Figure 19.4. TCON: Timer Control Register
R/W
TF0
Bit5
R/W
TR0
Bit4
Rev. 1.7
R/W
IE1
Bit3
R/W
Bit2
IT1
C8051F000/1/2/5/6/7
C8051F010/1/2/5/6/7
R/W
Bit1
IE0
(bit addressable)
R/W
IT0
Bit0
SFR Address:
Reset Value
00000000
0x88
142