C8051F020DK Silicon Laboratories Inc, C8051F020DK Datasheet - Page 144

DEV KIT FOR F020/F021/F022/F023

C8051F020DK

Manufacturer Part Number
C8051F020DK
Description
DEV KIT FOR F020/F021/F022/F023
Manufacturer
Silicon Laboratories Inc
Type
MCUr
Datasheet

Specifications of C8051F020DK

Contents
Evaluation Board, Power Supply, USB Cables, Adapter and Documentation
Processor To Be Evaluated
C8051F02x
Interface Type
USB
Silicon Manufacturer
Silicon Labs
Core Architecture
8051
Silicon Core Number
C8051F020
Silicon Family Name
C8051F02x
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
For Use With/related Products
Silicon Laboratories C8051 F020/021/022/023
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
336-1200

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
C8051F020DK
Manufacturer:
SiliconL
Quantity:
10
C8051F020/1/2/3
144
Bits7-3:
Bit2:
Bit1:
Bit0:
R/W
Bit7
-
UNUSED. Read = 00000b, Write = don't care.
SFLE: Scratchpad FLASH Memory Access Enable.
When this bit is set, FLASH reads and writes from user software are directed to the 128-byte Scratch-
pad FLASH sector. When SFLE is set to logic 1, FLASH accesses out of the address range 0x00-
0x7F should not be attempted. Reads/Writes out of this range will yield unpredictable results.
0: FLASH access from user software directed to the 64k byte Program/Data FLASH sector.
1: FLASH access from user software directed to the 128 byte Scratchpad sector.
PSEE: Program Store Erase Enable.
Setting this bit allows an entire page of the FLASH program memory to be erased provided the
PSWE bit is also set. After setting this bit, a write to FLASH memory using the MOVX instruction
will erase the entire page that contains the location addressed by the MOVX instruction. The value of
the data byte written does not matter.
0: FLASH program memory erasure disabled.
1: FLASH program memory erasure enabled.
PSWE: Program Store Write Enable.
Setting this bit allows writing a byte of data to the FLASH program memory using the MOVX
instruction. The location must be erased before writing data.
0: Write to FLASH program memory disabled.
1: Write to FLASH program memory enabled.
R/W
Bit6
-
Figure 15.4. PSCTL: Program Store Read/Write Control
R/W
Bit5
-
R/W
Bit4
-
Rev. 1.4
R/W
Bit3
-
SFLE
R/W
Bit2
PSEE
R/W
Bit1
PSWE
R/W
Bit0
SFR Address:
00000000
Reset Value
0x8F

Related parts for C8051F020DK