R0K561622S000BE Renesas Electronics America, R0K561622S000BE Datasheet - Page 624

• Manufacturer Part Number: R0K561622S000BE
• Description: KIT STARTER FOR H8SX/1622
• Manufacturer: Renesas Electronics America
• Series: Renesas Starter Kits (RSK)r
• Type: MCUr

Specifications of R0K561622S000BE

• Contents: Board, Cables, CD, Debugger, Power Supply
• Silicon Manufacturer: Renesas
• Features: Coding And Debugging, E10A Emulator, RS232 Serial Connection
• Kit Contents: Board
• Silicon Family Name: H8SX/1622F
• Silicon Core Number: R5F61622N50LGV
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: H8SX/1622
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Section 15 Watchdog Timer (WDT)
Note:
15.4
15.4.1
To use the WDT in watchdog timer mode, set both the WT/IT and TME bits in TCSR to 1.
During watchdog timer operation, if TCNT overflows without being rewritten because of a system
crash or other error, the WDTOVF signal is output. This ensures that TCNT does not overflow
while the system is operating normally. Software must prevent TCNT overflows by rewriting the
TCNT value (normally H'00 is written) before overflow occurs. This WDTOVF signal can be used
to reset the LSI internally in watchdog timer mode.
If TCNT overflows when the RSTE bit in RSTCSR is set to 1, a signal that resets this LSI
internally is generated at the same time as the WDTOVF signal. If a reset caused by a signal input
to the RES pin occurs at the same time as a reset caused by a WDT overflow, the RES pin reset
has priority and the WOVF bit in RSTCSR is cleared to 0.
The WDTOVF signal is output for 133 cycles of Pφ when RSTE = 1 in RSTCSR, and for 130
cycles of Pφ when RSTE = 0 in RSTCSR. The internal reset signal is output for 519 cycles of Pφ.
When RSTE = 1, an internal reset signal is generated. Since the system clock control register
(SCKCR) is initialized, the multiplication ratio of Pφ becomes the initial value.
When RSTE = 0, an internal reset signal is not generated. Neither SCKCR nor the multiplication
ratio of Pφ is changed.
When TCNT overflows in watchdog timer mode, the WOVF bit in RSTCSR is set to 1. If TCNT
overflows when the RSTE bit in RSTCSR is set to 1, an internal reset signal is generated for the
entire LSI.
Rev. 2.00 Sep. 16, 2009 Page 594 of 1036
REJ09B0414-0200
Bit
5
4 to 0
*
Bit Name


Operation
Watchdog Timer Mode
Only 0 can be written to this bit, to clear the flag.
Initial
Value
0
All 1
R/W
R/W
R
Description
Reserved
Although this bit is readable/writable, reading from or
writing to this bit does not affect operation.
Reserved
These are read-only bits and cannot be modified.