MPC8349E-MITXE Freescale Semiconductor, MPC8349E-MITXE Datasheet - Page 24

• Manufacturer Part Number: MPC8349E-MITXE
• Description: BOARD REFERENCE FOR MPC8349
• Manufacturer: Freescale Semiconductor
• Series: PowerQUICC II™ PROr
• Type: MPUr

Specifications of MPC8349E-MITXE

• Contents: Module and Misc Hardware
• Processor To Be Evaluated: MPC8349E
• Interface Type: Ethernet, USB
• Silicon Manufacturer: Freescale
• Core Architecture: Power Architecture
• Core Sub-architecture: PowerQUICC
• Silicon Core Number: MPC83xx
• Silicon Family Name: PowerQUICC II PRO
• Rohs Compliant: Yes
• For Use With/related Products: MPC8349E
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: MPC8349E-MITXE

MPC8349E-mITXE Board
1.4.3
Serial interface COM1 is available at connector P15, and another serial port connection COM2 is available
through a 10-pin connector P16 with pin assignment as shown in
1.4.4
The SATA connectors (P3, P4, P6, P8) connect to the serial ATA hard disks through serial ATA cables. P3
corresponds to harddisk0, and P4, P6, P8 correspond to harddisk1, harddisk2, and harddisk3, respectively.
1.4.5
The local bus expansion connector (J2) provides 16-bit data and 9-bit addressing capability for external
modules controlled by a single chip-select signal (CS2). It has six GPIO pins, two IRQs, and one SPI
interface. The pin assignments are listed in
1.4.6
The MPC8349E-mITXE board has one 32-bit 3.3 V PCI expansion slot (P1) for an expansion card.
24
RS-232 Connectors
Serial ATA (SATA) Connectors
Local Bus Expansion Connector
PCI Slot
Only the 3.3 V PCI Card is supported. Turn OFF power during insertion and
removal of PCI card.
MPC8349E-mITXE Reference Design Platform User’s Guide, Rev. 2
Pin
1
3
5
7
9
Table 12. COM2 Connector Pin Description
Preliminary—Subject to Change Without Notice
Signal
GND
RXD
CTS
NC
NC
Table 8
WARNING
in
Section 1.2.10, “Local Bus Expansion Connector.”
Pin
10
2
4
6
8
Table
Signal
GND
12.
TXD
RTS
NC
NC
Freescale Semiconductor