R0K564189S000BE Renesas Electronics America, R0K564189S000BE Datasheet - Page 22

• Manufacturer Part Number: R0K564189S000BE
• Description: KIT STARTER FOR R32C/118
• Manufacturer: Renesas Electronics America
• Series: Renesas Starter Kits (RSK)r
• Type: MCUr

Specifications of R0K564189S000BE

• Contents: CPU Board, LCD Display Module, E8 Emulator, Cable, QuickStart Guide and CD-ROM
• For Use With/related Products: R32C/100
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Reference
R120
R124
R125
R126
R127
R128
R129
R130
R132
R133
Table 6-10 below describes the function of the option links associated with Clock configuration.
6.7. Oscillator Sources
A crystal oscillator is fitted on the RSK board and used to supply the main clock input to the Renesas microcontroller. The oscillators that
are fitted and alternative footprints provided on this RSK board are detailed in Table 6-11
Warning: When replacing the default oscillator with that of another frequency, the debugging monitor may not function until the debugger
settings are modified to suit the debugger.
6.8. Reset Circuit
The RSK board includes a simple latch circuit that links the mode selection and reset circuit. This provides an easy method for swapping
the device between Boot Mode and User mode. This circuit is not required on customers’ boards as it is intended for providing easy
evaluation of the operating modes of the device on the RSK. Please refer to the hardware manual for more information on the requirements
of the reset circuit.
R135
Main clock
Main clock
Main clock
Main clock
Sub-clock
Sub-clock
Sub-clock
Sub-clock
Sub-clock
Main clock
Function
Application Board
Interface
Connects the external clock to the MCU.
Connects the on-board clock (X1) to the
MCU.
Connects the on-board clock (X1) from the
MCU.
Connects the external clock from the MCU.
Connects the external clock from the MCU.
Connects the on-board clock from the MCU.
Connects the on-board clock to the MCU.
Connects the external clock to the MCU.
Parallel resistor for X2
Parallel resistor for X1
Connects MCU port pin p10_7 (pin 133)
to CAN1_STBn
Table 6-9: Application Board Interface configuration links
Crystal (X1)
Crystal (X2)
Fitted
Table 6-10: Clock configuration links
Table 6-11: Oscillators / Resonators
Fitted
Fitted
Option Link Settings
Component
32.768 KHz (90SMX package)
16.0MHz (HC49/4H package)
17
On-board clock (X1) can be connected
External Clock Source can be connected.
External Clock Source can be connected.
On-board clock (X1) can be connected
On-board sub-clock (X2) can be connected
External Clock Source can be connected.
External Clock Source can be connected.
On-board sub-clock (X2) can be connected
Not fitted.
Not fitted.
Disconnects MCU port pin p10_7 (pin
133) from CAN1_STBn
Alternative ( Removed )
R131
R124
R120
R126
R125
R128
R127
R130
R129
-
-
Related
To