EVAL-AD7414/15EB Analog Devices Inc, EVAL-AD7414/15EB Datasheet - Page 6

• Manufacturer Part Number: EVAL-AD7414/15EB
• Description: BOARD EVALUATION FOR AD7414/15
• Manufacturer: Analog Devices Inc

Specifications of EVAL-AD7414/15EB

• Sensor Type: Temperature
• Sensing Range: -40°C ~ 125°C
• Interface: I²C, SMBus
• Sensitivity: ±0.5°C
• Voltage - Supply: 2.7 V ~ 5.5 V
• Embedded: No
• Utilized Ic / Part: AD7414, AD7415
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

EVAL-AD7414/15EB
EVALUATION BOARD HARDWARE
The AD7414/AD7415 evaluation board contains the following
main components, which can also be identified in the printed
circuit board silkscreen and schematic diagrams shown in
Figure 1 through Figure 3:
• AD7414 IC, U1
• AD7415 IC, U2
• USB microcontroller, U6
• ALERT LED, D2
• Power LED, D1
• Connector for USB interface, J1
Rev. 0 | Page 6 of 12
USING THE HARDWARE
The hardware is extremely simple to use. Before connecting the
evaluation board to the USB port on the PC, using the USB A to
mini-B cable provided, make sure that the software is installed.
No external power supply is required.
MINI-B USB CONNECTOR J1
The connections to J1 are shown in Table 1.
Table 1. J1 Connections
J1 Pin
1
2
3
4
5
The communication between the mini-B plug and the rest of
the evaluation board is handled by the USB microcontroller, U6.
TEST POINTS
Various system logic signals, ground, and the power rail are
available at the test points on the board.
Mini-B Function
5 V
−Data
+Data
Key (Not Used—Connected to Ground)
Ground