QW1 TechTools, QW1 Datasheet - Page 72

• Manufacturer Part Number: QW1
• Description: PROGRAMMER PIC MCU QUICKWRITER
• Manufacturer: TechTools
• Series: QuickWriter™r
• Type: QuickWriterr

Specifications of QW1

• Contents: MCU Programmer with In-Circuit Serial Programming Cable and Optional GANG Adapters
• For Use With/related Products: PIC Micro® MCU
• For Use With: CBL-ICSP - CABLE PROG QUICKWRITER SERIALQW-4SSOP18 - ADAPTER QUICKWRITER 4GANG 18SSOPQW-4SSOP28 - ADAPTER QUICKWRITER 4GANG 28SSOPQW-4SO8/14W - ADAPT QUICKWRTR 4GANG 8/14SOIC WQW-4SO8/14N - ADAPT QUICKWRTR 4GANG 8/14SOIC NQW-4SOIC18 - ADAPTER QUICKWRITER 4GANG 18SOICQW-4ZIF18 - ADAPTER QUICKWRITER 4-GANG 18ZIFQW-4SOIC28 - ADAPTER QUICKWRITER 4GANG 28SOICQW-4PLCC44 - ADAPTER QUICKWRITER 4GANG 44PLCCQW-4ZIF40/28 - ADAPT QUICKWRITER 4GANG 40/28ZIFMP-ZIF14 - ADAPTER QUICKWRITER 14-PIN ZIFMP-SOIC8/14 - ADAPTER QUICKWRITER 8/14-SOICMP-SSOP18 - ADAPTER QUICKWRITER 18-SSOPMP-SSOP28 - ADAPTER QUICKWRITER 28-SSOPMP-14000 - ADAPTR QUICKWRTR PIC14000 28-PINMP-SOIC18 - ADAPTER QUICKWRITER 18-SOICMP-SOIC28 - ADAPTER QUICKWRITER 28-SOICMP-PLCC44 - ADAPTER QUICKWRITER 44-PIN PLCCMP-ZIF18/28 - ADAPTER QUICKWRITER 18/28PIN ZIFMP-ZIF40 - ADAPTER QUICKWRITER 40-PIN ZIF

3.2.1.8.5 Programming Preferences
3.2.1.9
66
Resetting the Emulator
Sometimes, it may be necessary to reset the emulator hardware. For instanc e, there may be a
communications error between the PC and the emulator, which will require a reset.
PicTools Manual 3.0
Step OVER calls to unknown code
Show File Register Mirrors
Debugging with Stale Source Code
Enable Program Button
Make before Launch
Auto Program and Close
To reset the emulator, select Reset Mathias from the File menu.
When selected, any STEP operation will run full speed through calls that do not
have a source line reference (effectively performing a STEP OVER when
stepping).
When selected, the General Purpose Register window (file registers), will display
memory locations that are mirrored with other locations in ano ther bank. This also
means that multiple locations can change when the data in a "mirrored" location
changes . When NOT selected, mirrored locations will not be displayed.
Ask Me What to Do - If the source code has been modified, TDE will ask whether
to rebuild the source before continuing or continue without rebuilding (stale
debugging information).
Build and restart debugging - If the source code has been modified, TDE will
rebuild the source and reset the microcontroller before continuing. (fresh
debugging information).
Continue Debugging with stale data - If the source code has been modified, TDE
will continue without rebuilding or resetting the microcontroller (stale debugging
information).
This option Enables or Disables the QuickWriter programming button on TDE's
main Application bar, next to the Status area.
When Selected, the current project will be rebuilt before passing the resulting HEX
file to the QuickWriter application.
When launched, the QuickWriter software will automat ically program and close. If
an error occurred while programming, the application will stay open so that all error
information can be seen.
© 2007 TechTools