JQ1-12V Panasonic Electric Works, JQ1-12V Datasheet - Page 2

• Manufacturer Part Number: JQ1-12V
• Description: RELAY POWER SPDT 5A 12VDC PC MNT
• Manufacturer: Panasonic Electric Works
• Series: JQr

Specifications of JQ1-12V

• Relay Type: General Purpose
• Contact Form: SPDT (1 Form C)
• Contact Rating (current): 5A
• Switching Voltage: 125VAC
• Coil Type: Standard
• Coil Current: 33.3mA
• Coil Voltage: 12VDC
• Turn On Voltage (max): 9 VDC
• Turn Off Voltage (min): 0.6 VDC
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Circuit: SPDT (1 Form C)
• Contact Rating @ Voltage: 5A @ 125VAC
• Control On Voltage (max): 9 VDC
• Control Off Voltage (min): 0.6 VDC
• Brand/series: JQ Series
• Current, Rating: 5 A (NO), 2 A (NC)
• Diameter, Mounting: 0.051 in.
• Dimensions: 0.787 in. L x 0.394 in. W x 0.614 in. H
• Function: General Purpose
• Material, Contact: Silver Alloy
• Number Of Pins: 5
• Power, Rating: 90 W (NO)⁄30 W (NC)
• Standards: UL, CSA, VDE, TUV
• Temperature, Operating, Maximum: 85 °C
• Temperature, Operating, Minimum: -40 °C
• Termination: Solder
• Voltage, Control: 12 VDC
• Voltage, Rating: 250 VAC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 255-1264

JQ
RATING
1. Coil data
2. Specifications
* Specifications will vary with foreign standards certification ratings.
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
arrangement
Contact
Rating
Electrical
characteristics
Mechanical
characteristics
Expected life
Conditions
Unit weight
Characteristics
1 Form A
1 Form C
Contact
*2. Wave is standard shock voltage of 1.2 50 s according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
*4. When using relays in a high ambient temperature, consider the pick-up voltage rise due to the high temperature (a rise of approx. 0.4% V for each 1 C
actual load.
conditions in NOTES.
20 C
Nominal coil
68 F
12V DC
18V DC
24V DC
12V DC
18V DC
24V DC
48V DC
voltage
5V DC
6V DC
9V DC
5V DC
6V DC
9V DC
Arrangement
Contact resistance (Initial)
Contact material
Nominal switching capacity (resistive load)
Max. switching power (resistive load)
Max. switching voltage
Max. switching current
Nominal operating power
Min. switching capacity (reference value)*
Insulation resistance (Initial)
Breakdown voltage
(Initial)
Temperature rise (coil)
Surge breakdown voltage*
(Between contact and coil) (Initial)
Operate time (at nominal voltage) (at 20 C
(Initial)
Release time (at nominal voltage) (at 20 C
(Initial)
Shock resistance
Vibration resistance
Mechanical (at 180 times/min.)
Conditions for operation, transport and storage*
Max. operating speed
as a reference) and use a coil impressed voltage that is within the maximum applied voltage range.
nominal voltage (Initial)
nominal voltage (Initial)
nominal voltage (Initial)
nominal voltage (Initial)
High capacity type:
High capacity type:
75%V or less of
80%V or less of
75%V or less of
80%V or less of
Pick-up voltage
(at 20 C
Standard type:
Standard type:
Between open contacts
Between contact and coil
Functional
Destructive
Functional
Destructive
Item
68
2
F)
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
5%V or more of
nominal voltage
5%V or more of
nominal voltage
(at 20 C
Drop-out
voltage
(Initial)
(Initial)
1
68
68
F)
68
F)
3
F)
1,000 Vrms for 1 min.
Min. 1,000 M (at 500 V DC) Measurement at same location as “Breakdown voltage” section.
[ 10%] (at 20 C
applied to the coil; contact carrying current:
(By resistive method, nominal coil voltage
Nominal operating
625 VA, 150 W
5 A 125 V AC,
2 A 250 V AC,
5 A 30 V DC
1 Form A
200 mW
40.0mA
33.3mA
22.2mA
16.7mA
11.1mA
80 mA
66.7mA
44.4mA
33.3mA
22.2mA
16.7mA
current
8.3mA
8.3mA
Ambient temperature: –40 C to +70 C
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
294 m/s
N.O.: 5 A, N.C.: 2 A
5A, at 70 C
Max. 45 C
10 to 55 Hz at double amplitude of 1.6 mm (Detection time: 10 s.)
Standard type
Max. 10 ms (excluding contact bounce time) (Without diode)
68
–40 C to +85 C
2
F)
(Half-wave pulse of sine wave: 11 ms; detection time: 10 s.)
4,000 Vrms for 1 min. (Detection current: 10 mA)
980 m/s
Max. 20 ms (excluding contact bounce time.)
20 times/min. (at nominal switching capacity)
750 Vrms for 1 min.
113 F
158
[ 10%] (at 20 C
Max. 100m (By voltage drop 6 V DC 1 A)
10 to 55 Hz at double amplitude of 2.0 mm
5 A 125 V AC,
2 A 250 V AC,
2 A 125 V AC,
1 A 250 V AC,
625 VA, 90 W
250 VA, 30 W
3 A 30 V AC
1 A 30 V DC
Coil resistance
N.O. side:
N.O. side:
F)
N.C. side:
N.C. side:
1 Form C
400 mW
2
1,620
2,880
1,440
5,760
(Half-wave pulse of sine wave: 6 ms.)
250 V AC, 110 V DC (0.3A)
125
180
405
720
202.5
360
810
62.5
90
–40 F to +185
Approx. 7 g
100 mA, 5 V DC
Specifications
AgSnO
68
Min. 10
8,000 V
F)
2
–40 F to +158 F
1,000 Vrms for 1 min.
type
Nominal operating
1,250 V AC, 150 W
.25 oz
applied to the coil; contact carrying current:
7
(By resistive method, nominal coil voltage
F*
(at 20 C
10 A 125 V AC,
5 A 250 V AC,
5 A 30 V DC
4
1 Form A
200mW
400mW
200 mW
(class B insulation)
power
68
N.O.: 10 A, N.C.: 3 A
10A, at 70 C
High capacity type
Max. 45 C
F)
(class E insulation),
85 C
85 C
180% of nominal voltage
130% of nominal voltage
150% of nominal voltage
110% of nominal voltage
[When using relays at
[When using relays at
Max. applied voltage
750 Vrms for 1 min.
113 F
(at 70 C
(at 70 C
158
(at 20 C
(at 20 C
185
185
1,250 VA, 150 W
500 V AC, 30 W
10 A 125 V AC,
5 A 250 V AC,
3 A 125 V AC,
2 A 250 V AC,
5 A 30 V AC
1 A 30 V DC
N.O. side:
N.O. side:
N.C. side:
N.C. side:
1 Form C
400 mW
F)
F, see Notes*4]
F, see Notes*4]
158
158
68
68
33.8 F
F)
F)
F)
F)
with