Plug-In Relays
Mini ISO Relays
Power Relay F4 / VF4
Features
– Limiting continuous
current 40 A at 85°C
– Pin assignment similar
to ISO 7588 part 1
– Plug-in or PCB terminals
– Also available for
42 V applications
Customized Versions
on Request
– 24 V versions with contact
gap > 0.8 mm
– Integrated components
(e.g. resistor, diode)
– Customized marking/color
– Special covers (e.g. notches,
release features, brackets)
– Various contact arrangements
and materials
– For latching (bistable) version
refer to Mini Relay Latching
– For shrouded/weatherproof
dust cover versions refer to
Shrouded Power Relay F4 A
and VF4 A
Typical Applications
Cross carline up to 40 A
for example:
– ABS control
– Blower fans
– Car alarm
– Cooling fan
Design
– Electric Power Steering
– ELV/RoHS/WEEE compliant
– Energy management
– Dustproof: protection class IP54 to
– Engine control
IEC 529 (EN 60 529)
– Fuel pump
– Sealed: protection class IP67 to
– Heated front screen
IEC 529 (EN 60 529)
– Ignition
- Immobilizer
Weight
– Lamps front, rear, fog light
Approx. 35 g (1.2 oz.)
– Main switch/supply relay
– Seatbelt pretensioner
Nominal Voltage
– Trunk lock
12 V or 24 V; other nominal
– Valves
voltages available on request
– Window lifter
– Wiper control
Please contact Tyco Electronics
for relay application support.
Disclaimer
All technical performance data apply to the relay as such, specific conditions of the individual application are not considered. Please always check the suitability of the
relay for your intended purpose. We do not assume any responsibility or liability for not complying herewith. We recommend to complete our questionnaire and to request
our technical service. Any responsibility for the application of the product remains with the customer only. All specifications are subject to change without notification.
All rights of Tyco Electronics are reserved.
52
All specifications subject to change. Consult Tyco Electronics for latest specifications.
Terminals
Conditions
Quick connect terminals similar to
All parametric, environmental and
ISO 8092-1, coil and load 6.3 x 0.8 mm;
endurance tests are performed
surfaces tin plated or PCB terminals
according to EIA Standard RS-407-A
at standard test conditions unless
Accessories
otherwise noted:
Connectors see page 229 ff
23°C ambient temperature,
20 - 50% RH, 998.9 ±33.9 hPa.
For general storage and processing
recommendations please refer to our
Application Notes and especially to
Storage in the “Glossary” page 23 or
at http://relays.tycoelectronics.com/
appnotes/
Catalog 1308028-2
Revised 3-2008
134_3Dco_1