RES 5.0 OHM 10W OVAL SILICONE

FSOT10-5

Manufacturer Part NumberFSOT10-5
DescriptionRES 5.0 OHM 10W OVAL SILICONE
ManufacturerHuntington Electric Inc.
SeriesFSOT
FSOT10-5 datasheet
 

Specifications of FSOT10-5

Resistance (ohms)5Power (watts)10W
CompositionWirewoundTemperature Coefficient±400ppm/°C
Tolerance±5%Coating, Housing TypeSilicon Coated
Mounting FeatureFlange Braces, Right AngleSize / Dimension0.750" L x 0.125" W (19.05mm x 3.18mm)
Height0.375" (9.53mm)Lead StyleSolder Lugs
Package / CaseRadial, Flat OvalLead Free Status / RoHS StatusLead free / RoHS Compliant
Page 1/1

Download datasheet (89Kb)Embed
FVOT / FSOT
MINIATURE OVAL
WIREWOUND RESISTORS
H.E.I. Miniature Oval Wirewound Resistors are ideally suited for applications
where space is limited and the mounting surface can be utilized for heat dissi-
pation purposes. A thin oval cross section and flat mounting brackets allow
stacking into compact units. The aluminum mounting brackets extend through
the resistor core and equalize heat distribution while conducting heat directly
into the mounting suface.
FVOT-10
10
FVOT-15
15
FVOT-20
20
TYPE
POWER
V=VITREOUS
INCLUDE FOR
TOLERANCE (J = ±5%)
S=SILICON
RESISTANCE TOLERANCE: Standard tolerance is ±5% for 1 ohm and greater and
±10% for less than 1 ohm. Available Tolerances: F = ±1%, J = ±5%, K = ±10%
MOUNTING BRACKETS: Constructed of aluminum and are an integral part of the
resistor.
NON-INDUCTIVE: Ayrton-Perry type non-inductive winding is available. When required
add “NI” to the part number.
TEMPERATURE COEFFICIENT: ±400 PPM/8C 1Ω to 20Ω, ±260 PPM/8C 20Ω and
above. (Special TC’s are availalbe, consult factory.)
DIELECTRIC WITHSTANDING VOLTAGE: 500 VAC measured from terminals to
mounting brackets.
OVERLOAD: 10 X rated wattage for 5 seconds.
TERMINALS: Hot tin dipped are standard.
COATING: Available in Vitreous Enamel or Silicone.
CORE: Steatite ceramic.
1
.75 (19.1)
1.00 (25.4)
1.00 (25.4)
1.25 (31.8)
2.00 (50.8)
2.31 (58.7)
RESISTANCE
ADD FOR
VALUE
NON-INDUCTIVE
1
Wattage Rating is based upon a
single resistor mounted on a 10” X 10” X
.040” steel mounting surface or equivalent.
See derating charts for stacked resistors or
higher ambient temperatures.
L
2
70
3
60
4
50
1
1
75
70
65