RH02515R00FE02 Vishay, RH02515R00FE02 Datasheet - Page 4

• Manufacturer Part Number: RH02515R00FE02
• Description: RES 15 OHM 1% 25W ALUM HOUSED WW
• Manufacturer: Vishay
• Series: RHr

Specifications of RH02515R00FE02

• Resistance: 15 Ohms
• Power Rating: 25 Watts
• Temperature Coefficient: ±20ppm/°C
• Resistance (ohms): 15
• Power (watts): 25W
• Composition: Wirewound
• Tolerance: ±1%
• Coating, Housing Type: Aluminum Housed
• Mounting Feature: Flanges
• Size / Dimension: 1.062" L x 1.080" W (26.97mm x 27.43mm)
• Height: 0.546" (13.87mm)
• Lead Style: Solder Lugs
• Package / Case: Axial, Box
• Operating Temperature Range: - 55 C to + 250 C
• Dimensions: 27.43 mm W x 26.97 mm L x 13.87 mm H
• Product: Power Resistors Wire Wound Aluminum Housed
• Resistance Tolerance: ± 1%
• Resistor Element Material: Wirewound
• Resistor Case Style: Axial Lugs
• No. Of Pins: 2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: RHRC-15

RH, NH
Vishay Dale
MATERIAL SPECIFICATIONS
Element: Copper-nickel alloy or nickel-chrome alloy,
depending on resistance value
Core: Ceramic, steatite or alumina, depending on physical
size
Encapsulant: Silicone molded construction
Housing: Aluminum with hard anodic coating
End Caps: Stainless steel
Standard Terminals: For RH005 through RH050 size
terminal finish - Tin/lead is 60/40 Sn/Pb w/Nickel underplate
and Lead (Pb)-free is Ni/Pd/Au, finish is on copper clad
steel core terminal. For RH100 and RH250 terminals are
threaded stainless steel.
Part Marking: Dale, model, wattage, value, tolerance, date
code
NH NON-INDUCTIVE
Models of equivalent physical and electrical specifications
are available with non-inductive (Aryton-Perry) winding.
They are identified by substituting the letter N for R in the
model number (NH005, for example).
www.vishay.com
4
PERFORMANCE
TEST
Thermal Shock
Short Time Overload
Dielectric Withstanding
Voltage
Temperature
Moisture Resistance
Shock, Specified Pulse
Vibration, High Frequency
Load Life
Terminal Strength
Rated power applied until thermally stable, then a minimum of 15 min at - 55 °C
5 x rated power for 5 s
1000 V
4500 V
250 °C for 2 h
MIL-STD-202 Method 106, 7b not applicable
MIL-STD-202 Method 213, 100 g’s for 6 ms, 10 shocks
Frequency varied 10 Hz to 2000 Hz, 20 g peak, 2 directions 6 h each
1000 h at rated power, + 25 °C, 1.5 h “ON”, 0.5 h “OFF”
30 s, 5 pound pull test for RH005 and RH010, 10 pound pull test for other sizes;
torque test - 24 pound inch for RH100 and 32 pound inch for RH250
rms
rms
For technical questions, contact:
Wirewound Resistors, Industrial Power,
for RH005, RH010 and RH025; 2000 Vrms for RH050;
for RH100 and RH250; duration 1 min
Aluminum Housed, Chassis Mount
CONDITIONS OF TEST
[e-mail]
SPECIAL MODIFICATIONS
A number of special modifications to the aluminum housed
resistor
modifications include:
• Terminal configurations and materials
• Resistance values and tolerances
• Low resistance temperature coefficient (RTC)
• Housing configuration
• Threaded mounting holes
• Preconditioning and other additional testing
APPLICABLE MIL SPECIFICATIONS
Vishay RH and NH resistors are listed as qualified on the
MIL-PRF-18546 QPL. MIL-PRF-18546 qualified, type RE
resistors can be found at:
style
are
available
www.vishay.com/doc?30282
upon
Document Number: 30201
± (0.5 % + 0.05 ) R
± (0.5 % + 0.05 ) R
± (0.2 % + 0.05 ) R
± (0.5 % + 0.05 ) R
± (1.0 % + 0.05 ) R
± (0.2 % + 0.05 ) R
± (0.2 % + 0.05 ) R
± (1.0 % + 0.05 ) R
± (0.2 % + 0.05 ) R
TEST LIMITS
Revision: 02-Mar-11
request.
Special