ISL90462 Intersil Corporation, ISL90462 Datasheet

no-image

ISL90462

Manufacturer Part Number
ISL90462
Description
Digitally Controlled Potentiometer
Manufacturer
Intersil Corporation
Datasheet
Digitally Controlled Potentiometer
(XDCP™)
The Intersil ISL90462 is a digitally controlled potentiometer
(XDCP). Configured as a variable resistor, the device
consists of a resistor array, wiper switches, a control section,
and volatile memory. The wiper position is controlled by a 2-
pin Up /Down interface.
The potentiometer is implemented by a resistor array
composed of 31 resistive elements and a wiper switching
network. Between each element and at either end are tap
points accessible to the wiper terminal. The position of the
wiper element is controlled by the CS and U/D inputs.
The device can be used in a wide variety of applications
including:
• LCD contrast control
• Parameter and bias adjustments
• Industrial and Automotive Control
• Transducer adjustment of pressure, temperature, position,
• Laser Diode driver biasing
• Gain control and offset adjustment
Ordering Information
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are
RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020
ISL90462WIE627-TK
ISL90462WIE627Z-TK (See Note) DEK
ISL90462WIH627-TK
ISL90462WIH627Z-TK (See Note) DEL
ISL90462UIE627-TK
ISL90462UIE627Z-TK (See Note) DEI
ISL90462UIH627-TK
ISL90462UIH627Z-TK (See Note) DEJ
ISL90462TIE627-TK
ISL90462TIE627Z-TK (See Note)
ISL90462TIH627-TK
ISL90462TIH627Z-TK See Note)
chemical, and optical sensors
PART NUMBER
®
1
AJS
AKB
AJU
AKD
AJT
DEG
AKC
DEH
PART MARKING
Data Sheet
www.DataSheet4U.com
R
1-888-INTERSIL or 1-888-468-3774
TOTAL
100
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
XDCP is a trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2005. All Rights Reserved
10
50
(K)
Features
• Volatile Solid-State Potentiometer
• 2-pin UP/DN Interface
• DCP Terminal Voltage, 2.7V to 5.5V
• Tempco 35ppm/
• 32 Wiper Tap Points
• Low Power CMOS
• Available R
• Temperature Range
• Packages
• Pb-Free Plus Anneal Available (RoHS Compliant)
Pinout
TEMP RANGE (°C)
- Active current, 25µA max.
- Supply current 0.3µA
- 6 Ld SC-70, SOT-23
-40 to +85
-40 to +85
-40 to +85
-40 to +85
-40 to +85
-40 to +85
-40 to +85
-40 to +85
-40 to +85
-40 to +85
-40 to +85
-40 to +85
October 7, 2005
All other trademarks mentioned are the property of their respective owners.
|
Intersil (and design) is a registered trademark of Intersil Americas Inc.
TOTAL
GND
VDD
U/D
°C Typical
Single Volatile 32-tap XDCP
6 Ld SC-70
6 Ld SC-70 (Pb-free)
6 Ld SOT-23
6 Ld SOT-23 (Pb-free)
6 Ld SC-70
6 Ld SC-70 (Pb-free)
6 Ld SOT-23
6 Ld SOT-23 (Pb-free)
6 Ld SC-70
6 Ld SC-70 (Pb-free)
6 Ld SOT-23
6 Ld SOT-23 (Pb-free)
Values = 10kΩ, 50kΩ, 100kΩ
PACKAGE (Tape and Reel) PKG. DWG. #
-40°C to +85°C
(SOT23, SC70)
TOP VIEW
ISL90462
ISL90462
RH
RW
CS
FN8230.3
P6.049
P6.049
P6.064
P6.064
P6.049
P6.049
P6.064
P6.064
P6.049
P6.049
P6.064
P6.064

Related parts for ISL90462

ISL90462 Summary of contents

Page 1

... Data Sheet Digitally Controlled Potentiometer (XDCP™) The Intersil ISL90462 is a digitally controlled potentiometer (XDCP). Configured as a variable resistor, the device consists of a resistor array, wiper switches, a control section, and volatile memory. The wiper position is controlled pin Up /Down interface. ...

Page 2

... Block Diagram UP/DOWN (U/D) CONTROL AND MEMORY DEVICE SELECT (CS) GND (GROUND) GENERAL 2 ISL90462 Pin Descriptions VCC 6-PIN SYMBOL DESCRIPTION VDD Supply voltage GND Ground/Low terminal U Down CS Chip select RW Wiper terminal RH High terminal October 7, 2005 FN8230.3 ...

Page 3

... A Equivalent Circuit R TOTAL ISL90462 Recommended Operating Conditions Temperature Range (Industrial -40°C to 85° 2.7V to 5.5V CC Over recommended operating conditions unless otherwise stated. TEST CONDITIONS W version U version T version Ref: 1kHz H(n)(actual) H(n)(expected ...

Page 4

... U/D LOW period lL t U/D HIGH period lH f Up/Down toggle Rate TOGGLE t Output settling time SETTLE U/D RW FIGURE 1. SERIAL INTERFACE TIMING DIAGRAM, INCREMENT 4 ISL90462 TEST CONDITIONS CS = 0V, U 1MHz and V clock U/D = GND GND 3V GND 25° 1MHz ...

Page 5

... Principles of Operation There are two sections of the ISL90462: the input control, counter and decode section; and the resistor array. The input control section operates just like an up/down counter. The output of this counter is decoded to turn on a single electronic switch connecting a point on the resistor array to the wiper output ...

Page 6

... SEATING 0.10 (0.004 WITH PLATING b1 c BASE METAL 4X θ1 R1 SEATING L PLANE α θ1 VIEW C 6 ISL90462 P6.064 VIEW C 6 LEAD SMALL OUTLINE TRANSISTOR PLASTIC PACKAGE SYMBOL PLANE e1 - ...

Page 7

... However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com 7 ISL90462 P6.049 VIEW C 6 LEAD SMALL OUTLINE TRANSISTOR PLASTIC PACKAGE ...

Related keywords