MAX335 Maxim, MAX335 Datasheet

no-image

MAX335

Manufacturer Part Number
MAX335
Description
The MAX335 analog switch with serial digital interface offers eight separately controlled single-pole-single-throw (SPST) switches
Manufacturer
Maxim
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MAX335
Manufacturer:
MAXIM
Quantity:
5 510
Part Number:
MAX335
Manufacturer:
CMD
Quantity:
5 510
Part Number:
MAX3355EEUD
Manufacturer:
MAXIM
Quantity:
24
Part Number:
MAX3355EEUD
Manufacturer:
MAXIM
Quantity:
46
Part Number:
MAX3355EEUD
Manufacturer:
MAXIM/美信
Quantity:
20 000
Company:
Part Number:
MAX3355EEUD+T
Quantity:
1 550
Part Number:
MAX3355EUD
Manufacturer:
MAXIM/美信
Quantity:
20 000
Part Number:
MAX335CNG
Manufacturer:
MAXIM/美信
Quantity:
20 000
Part Number:
MAX335CNG+
Manufacturer:
Maxim
Quantity:
108
Part Number:
MAX335CWG
Manufacturer:
MAXIM/美信
Quantity:
20 000
Part Number:
MAX335CWG+T
0
Part Number:
MAX335EUG
Manufacturer:
MAXIM/美信
Quantity:
20 000
The MAX335 analog switch with serial digital interface
offers eight separately controlled single-pole-single-
throw (SPST) switches. All switches conduct equally in
either direction, and on-resistance (100W) is constant
over the analog signal range.
These CMOS switches can operate continuously with
power supplies ranging from ±4.5V to ±20V and handle
rail-to-rail analog signals. Upon power-up, all switches are
off, and the internal serial and parallel shift registers are
reset to zero. The MAX335 is equivalent to two DG211
quad switches but controlled by a serial interface.
The interface is compatible with the Motorola SPI inter-
face standard. Functioning as a shift register, this serial
interface allows data (at DIN) to be locked in synchro-
nous with the rising edge of clock (SCLK). The shift reg-
ister's output (DOUT) enables several MAX335s to be
daisy chained.
________________________Applications
19-0220; Rev 3; 10/03
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800
_______________General Description
COM0
Serial Data Acquisition and Process Control
Avionics
Signal Routing
Networking
SCLK
NO0
D
CS
V
IN
L
8-BIT SHIFT REGISTER
CLOCK TRANSLATOR
Serial Controlled, 8-Channel SPST Switch
+5V TRANSLATOR
CS TRANSLATOR
PARALLEL REGISTER AND TRANSLATOR
________________________________________________________________ Maxim Integrated Products
LATCH
MAX335
NO7
COM7
DOUT
o 8 Separately Controlled SPST Switches
o SPI-Compatible Serial Interface
o Accepts ±15V Analog Swings
o Multiple Devices Can Be Daisy Chained
____________________________Features
* Contact factory for dice specifications.
** Contact factory for availability and processing to MIL-STD-883.
__________________Pin Configuration
______________Ordering Information
MAX335CNG
MAX335CWG
MAX335C/D
MAX335ENG
MAX335EUG
MAX335EWG
MAX335MRG
TOP VIEW
PART
COM0
COM1
COM2
COM3
SCLK
GND
NO0
NO1
NO2
NO3
DIN
V+
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
TEMP RANGE
10
11
12
1
2
3
4
5
6
7
8
9
0°C to +70°C
0°C to +70°C
0°C to +70°C
MAX335
DIP/SO
PIN-PACKAGE
24 Narrow Plastic DIP
24 Wide SO
Dice*
24 Narrow Plastic DIP
24 TSSOP
24 Wide SO
24 Narrow CERDIP**
24
23
22
21
20
19
18
17
16
15
14
13
CS
VL
DOUT
V-
NO7
COM7
NO6
COM6
NO5
COM5
NO4
COM4
1

Related parts for MAX335

MAX335 Summary of contents

Page 1

... Upon power-up, all switches are off, and the internal serial and parallel shift registers are reset to zero. The MAX335 is equivalent to two DG211 quad switches but controlled by a serial interface. The interface is compatible with the Motorola SPI inter- face standard ...

Page 2

... Wide SO (derate 11.76mW/°C above +70°C) .................941mW Narrow CERDIP (derate 12.50mW/°C above +70°C) .....1000mW TSSOP (derate 12.2mW/°C above +70°C)...........................30mA Operating Temperature Ranges MAX335C_ _ ............................................................0°C to +70°C MAX335E_ _ .........................................................-40°C to +85°C MAX335MRG.......................................................-55°C to +125°C Storage Temperature Range ..............................-65°C to +160°C Lead Temperature (soldering, 10sec)...............................+300° ...

Page 3

Serial Controlled, 8-Channel SPST Switch ELECTRICAL CHARACTERISTICS (continued +5V ±10 15V -15V PARAMETER SYMBOL DIGITAL I/O DOUT Output Voltage V DOUT Logic Low V RESET Voltage RESET Voltage V ...

Page 4

... Serial Controlled, 8-Channel SPST Switch TIMING CHARACTERISTICS OF SERIAL DIGITAL INTERFACE (Figure +5V ±10 +15V -15V PARAMETER SYMBOL SCLK Maximum Frequency Cycle Time Lead Time CS Lag Time SCLK High Time SCLK Low Time Data-Setup Time Data-Hold Time DOUT Data Valid After ...

Page 5

Serial Controlled, 8-Channel SPST Switch __________________________________________Typical Operating Characteristics (V+ = +15V -15V 5V +25°C, unless otherwise noted vs. V AND ON COM POWER-SUPPLY VOLTAGE 300 A: ± ±10V 250 ...

Page 6

... SCLK’s rising edge. The data is an 8-bit word, each bit controlling one of eight switches in the MAX335 (Table 1). DOUT is the output of the shift register, with data appearing syn- chronous with SCLK’s falling edge. Data at DOUT is simply the input data delayed by eight clock cycles ...

Page 7

Serial Controlled, 8-Channel SPST Switch CS t CSS t CSH0 SCLK DIN DOUT Figure 1. Timing Diagram SWITCHES UPDATED CS SCLK DATA CLOCKED IN DIN MSB INPUT DATA BITS DATA CLOCKED OUT ...

Page 8

... MAX335 MICROWIRE PORT THE DOUT-MISO CONNECTION IS NOT REQUIRED FOR WRITING TO THE MAX335, BUT MAY BE USED FOR DATA-ECHO PURPOSES. Figure 4. Connections for SPI FUNCTION D0 X Switch 7 open (off) X Switch 7 closed (on) X Switch 6 open X Switch 6 closed X Switch 5 open ...

Page 9

... DIN CS CS Figure 5. Daisy-Chained Connection DIN SCLK CS1 CS2 CS3 CS MAX335 SCLK DIN Figure 6. Addressable Serial Interface _______________________________________________________________________________________ SCLK MAX335 DOUT DIN DOUT CS CS MAX335 SCLK DIN SCLK MAX335 DIN DOUT CS TO OTHER SERIAL DEVICES TO OTHER SERIAL DEVICES CS MAX335 SCLK DIN 9 ...

Page 10

... Serial Controlled, 8-Channel SPST Switch __________Applications Information Multiplexer To use the MAX335 multiplexer, tie all drains together (COM0 to COM7); the mux inputs now source each switch (NO0 to NO7). Input a single 0V to +3V pulse at DIN. As this is clocked through the regis- ter by SCLK, each switch will sequence on one at a time ...

Page 11

Serial Controlled, 8-Channel SPST Switch ________________________________________________________Package Information ______________________________________________________________________________________ 45˚ A 0.127mm 0.004in INCHES MILLIMETERS DIM MIN MAX MIN A – ...

Page 12

Serial Controlled, 8-Channel SPST Switch ___________________________________________Package Information (continued ______________________________________________________________________________________ INCHES MILLIMETERS DIM MIN MAX MIN MAX A – 0.200 – 5.08 B 0.014 0.023 0.36 ...

Page 13

... Serial Controlled, 8-Channel SPST Switch ___________________________________________Package Information (continued) Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. ...

Related keywords