NE57600 Philipss, NE57600 Datasheet
NE57600
Related parts for NE57600
NE57600 Summary of contents
Page 1
... NE57600 One-cell Lithium-ion battery protection with over/undercharge and overcurrent protection Product data File under Integrated Circuits, Standard Analog INTEGRATED CIRCUITS 2001 Oct 03 ...
Page 2
... The NE57600 is a single-cell Li-ion protection IC. The NE57600 over and under voltage accuracy is trimmed to within 25 mV (5%) and is available to match the requirements of all lithium-ion cells manufactured in the market today. ...
Page 3
... DESCRIPTION NE57600XD SOT-26A small outline plastic surface mount, 6-pin NOTE: The device has ten protection parameter options, indicated by the X on the order code, and defined in the following table. TYPICAL PROTECTION PARAMETERS IN THE NE57600 FAMILY Overcharge Part Number detection voltage (V) NE57600Y 4.200 NE57600D 4 ...
Page 4
... – 1 – 0 –0 3.6 V, between GND–VM voltage Charger voltage CC 4 Product data NE57600 MIN. MAX. UNIT –0.3 +18 V – V – – V – –20 +70 C –40 +125 C – 200 mW Min ...
Page 5
... EXTERNAL CAPACITOR ( F) Over-voltage time delay versus Figure 3. external capacitor 0.0 1.0 2.0 3.0 4.0 Supply voltage, V (V) CC Supply current versus supply voltage. Figure 4. 2001 Oct 03 6.0 5.0 4.0 3.0 2.0 1.0 0.0 0.0 1.0 1 SL01550 Figure 5. Supply current versus supply voltage. 5.0 6.0 SL01551 5 Product data NE57600 2.0 3.0 4.0 5.0 6.0 Supply voltage, V (V) CC SL01552 ...
Page 6
... The average operating voltage of a lithium-ion or polymer cell is 3 compared to the 1 NiCd and NiMH cells. The typical discharge curve for Lithium cell is shown in Figure 6. V 4.0 OV cell 3.0 2.0 50 NORMALIZED CELL CAPACITY (%) Figure 6. Lithium discharge curve. 6 Product data NE57600 V UV 100 SL01553 ...
Page 7
... Charging Lithium Cells The lithium cells must be charged with a dedicated charging IC such as the NE57600. These dedicated charging ICs perform a current-limited, constant-voltage charge, as shown in Figure 7. The charger IC begins charging with a current that is typically the rating of the cell (1C) or the milliampere rating of the cell. As the cell ...
Page 8
... Cell Voltage t DLY(OV) VOLTAGE CF Voltage DF Voltage GND Level VM Voltage Charge Mode 2001 Oct 03 Hysteresis Over-discharge time delay Excess Discharge Current Mode Discharge Mode Discharge Mode Charge Mode Figure 8. Timing diagram. 8 Product data NE57600 Undervoltage Threshold Dead Time Excess Discharge Mode SL01555 ...
Page 9
... One-cell Lithium-ion battery protection with over/undercharge and overcurrent protection APPLICATION INFORMATION The NE57600 drives the series N-Channel MOSFETs to states determined by the cell’s voltage and the battery pack load current. During normal operation, both the discharge and charge MOSFETs are ON, allowing bidirectional current flow. ...
Page 10
... MOSFET can be turned FET ON resistance OFF. So having an FBSOA envelope that exceeds 20 amperes for 5 ms would be safe. REEL ASSEMBLY Figure 11. Tape and reel packing method. 10 Product data NE57600 over the entire range can be (on (Equation 1) (on) cell TAPE DETAIL COVER TAPE ...
Page 11
... Philips Semiconductors One-cell Lithium-ion battery protection with over/undercharge and overcurrent protection SOT-26A: plastic small outline package; 6 leads; body width 1 1.2 0.55 0.025 1.15 1.0 0.41 SOT-26A 2001 Oct 03 0.22 3.00 1.70 0.08 2.70 1.50 11 Product data NE57600 0.55 0.35 ...
Page 12
... Contact information For additional information please visit http://www.semiconductors.philips.com. For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. 2001 Oct 03 Fax: + 24825 Document order number: 12 Product data NE57600 Koninklijke Philips Electronics N.V. 2001 All rights reserved. Printed in U.S.A. Date of release: 10-01 9397 750 08981 ...