DSPIC33FJ16GS502-I/SO Microchip Technology, DSPIC33FJ16GS502-I/SO Datasheet - Page 163

• Manufacturer Part Number: DSPIC33FJ16GS502-I/SO
• Description: IC DSPIC MCU/DSP 16K 28-SOIC
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ16GS502-I/SO

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SOIC (7.5mm Width)
• Core Frequency: 40MHz
• Core Supply Voltage: 3.3V
• Embedded Interface Type: I2C, SPI, UART
• No. Of I/o's: 21
• Flash Memory Size: 16KB
• Supply Voltage Range: 3V To 3.6V
• Package: 28SOIC W
• Device Core: dsPIC
• Family Name: dsPIC33
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 21
• Interface Type: I2C/SPI/UART
• On-chip Adc: 8-chx10-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

10.5
The
dsPIC33FJ16GSX02/X04 families of devices implement
34 registers for remappable peripheral configuration:
• 15 Input Remappable Peripheral Registers
• 19 Output Remappable Peripheral Registers
REGISTER 10-1:
© 2009 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15-14
bit 13-8
bit 7-0
Note:
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
U-0
U-0
—
—
Peripheral Pin Select Registers
Input and output register values can only
be changed if OSCCON<IOLOCK> = 0.
See Section 10.4.3.1 “Control Register
Lock” for a specific command sequence.
dsPIC33FJ06GS101/X02
Unimplemented: Read as ‘0’
INT1R<5:0>: Assign External Interrupt 1 (INTR1) to the Corresponding RPn Pin bits
111111 = Input tied to V
100011 = Input tied to RP35
100010 = Input tied to RP34
100001 = Input tied to RP33
100000 = Input tied to RP32
•
•
•
00000 = Input tied to RP0
Unimplemented: Read as ‘0’
U-0
U-0
—
—
RPINR0: PERIPHERAL PIN SELECT INPUT REGISTER 0
W = Writable bit
‘1’ = Bit is set
R/W-1
U-0
—
SS
R/W-1
U-0
and
Preliminary
—
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/W-1
Not all output remappable peripheral registers are
implemented on all devices. See the register
description of the specific register for further details.
U-0
—
INT1R<5:0>
R/W-1
U-0
—
x = Bit is unknown
R/W-1
U-0
—
DS70318D-page 161
R/W-1
U-0
—
bit 8
bit 0