DSPIC33FJ16GS504-I/PT Microchip Technology, DSPIC33FJ16GS504-I/PT Datasheet - Page 247

• Manufacturer Part Number: DSPIC33FJ16GS504-I/PT
• Description: IC DSPIC MCU/DSP 16K 44-TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ16GS504-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 16KB (16K x 8)
• Package / Case: 44-TQFP, 44-VQFP
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 35
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 12x10b, D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Product: DSCs
• Data Bus Width: 16 bit
• Processor Series: DSPIC33F
• Core: dsPIC
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 35
• Data Ram Size: 2 KB
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

REGISTER 19-1:
© 2009 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15
bit 14
bit 13
bit 12
bit 11
bit 10
bit 9
bit 8
bit 7
bit 6
bit 5
Note 1: This control bit can only be changed while ADC is disabled (ADON = 0), and only applies to single SAR
R/W-0
ADON
R/W-0
EIE
(1)
devices.
ADON: A/D Operating Mode bit
1 = A/D converter module is operating
0 = A/D converter is off
Unimplemented: Read as ‘0’
ADSIDL: Stop in Idle Mode bit
1 = Discontinue module operation when device enters Idle mode
0 = Continue module operation in Idle mode
SLOWCLK: Enable The Slow Clock Divider bit
1 = ADC is clocked by the auxiliary PLL (ACLK)
0 = ADC is clock by the primary PLL (F
Unimplemented: Read as ‘0’
GSWTRG: Global Software Trigger bit
When this bit is set by the user, it will trigger conversions if selected by the TRGSRC<4:0> bits in the
ADCPCx registers. This bit must be cleared by the user prior to initiating another global trigger (i.e., this
bit is not auto-clearing).
Unimplemented: Read as ‘0’
FORM: Data Output Format bit
1 = Fractional (D
0 = Integer (D
EIE: Early Interrupt Enable bit
1 = Interrupt is generated after first conversion is completed
0 = Interrupt is generated after second conversion is completed
ORDER: Conversion Order bit
1 = Odd numbered analog input is converted first, followed by conversion of even numbered input
0 = Even numbered analog input is converted first, followed by conversion of odd numbered input
SEQSAMP: Sequential Sample Enable bit
1 = Shared Sample and Hold (S&H) circuit is sampled at the start of the second conversion if
0 = Shared S&H is sampled at the same time the dedicated S&H is sampled if the shared S&H is not
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
ORDER
R/W-0
U-0
ORDER = 0. If ORDER = 1, then the shared S&H is sampled at the start of the first conversion.
currently busy with an existing conversion process. If the shared S&H is busy at the time the
dedicated S&H is sampled, then the shared S&H will sample at the start of the new conversion
cycle.
—
ADCON: A/D CONTROL REGISTER
(1)
W = Writable bit
‘1’ = Bit is set
SEQSAMP
OUT
ADSIDL
OUT
R/W-0
R/W-0
= 0000 00dd dddd dddd)
= dddd dddd dd00 0000)
(1)
ASYNCSAMP
(1)
(1)
SLOWCLK
(1)
R/W-0
R/W-0
Preliminary
VCO
(1)
(1)
(1)
)
(1)
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
U-0
U-0
—
—
GSWTRG
R/W-0
R/W-0
ADCS<2:0>
x = Bit is unknown
R/W-1
U-0
—
DS70318D-page 245
(1)
FORM
R/W-0
R/W-1
bit 8
bit 0
(1)