EZ80F92AZ020EG Zilog, EZ80F92AZ020EG Datasheet - Page 128

• Manufacturer Part Number: EZ80F92AZ020EG
• Description: IC ACCLAIM MCU 128KB 100LQFP
• Manufacturer: Zilog
• Series: eZ80® Acclaim!®r

Specifications of EZ80F92AZ020EG

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, WDT
• Number Of I /o: 24
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 100-LQFP
• Processor Series: EZ80F92x
• Core: eZ80
• Data Bus Width: 8 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, IrDA, SPI, UART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 24
• Number Of Timers: 6
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: eZ80F920200ZCOG
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details
• Other names: 269-3871; EZ80F92AZ020EG

PS015313-0508
UART Modem Status Register
This register is used to show the status of the UART signals. See
Bit
Position
3
FE
2
PE
1
OE
0
DR
Value
0
1
0
1
0
1
0
1
Description
No framing error detected for character at the top of the FIFO.
This bit is reset to 0 when the UARTx_LSR register is read.
Framing error detected for the character at the top of the FIFO.
This bit is set to 1 when the stop bit following the data/parity bit
is logic 0.
The received character at the top of the FIFO does not contain
a parity error. In multidrop mode, this indicates that the
received character is a data byte. This bit is reset to 0 when the
UARTx_LSR register is read.
The received character at the top of the FIFO contains a parity
error. In multidrop mode, this indicates that the received
character is an address byte.
The received character at the top of the FIFO does not contain
an overrun error. This bit is reset to 0 when the UARTx_LSR
register is read.
Overrun error is detected. If the FIFO is not enabled, this
indicates that the data in the receive buffer register was not
read before the next character was transferred into the receiver
buffer register. If the FIFO is enabled, this indicates the FIFO
was already full when an additional character was received by
the receiver shift register. The character in the receiver shift
register is not put into the receiver FIFO.
This bit is reset to 0 when the UARTx_RBR register is read or
all bytes are read from the receiver FIFO.
Data Ready
If the FIFO is not enabled, this bit is set to 1 when a complete
incoming character is transferred into the receiver buffer
register from the receiver shift register. If the FIFO is enabled,
this bit is set to 1 when a character is received and transferred
to the receiver FIFO.
Universal Asynchronous Receiver/Transmitter
Product Specification
Table 65
eZ80F92/eZ80F93
on page 122.
121