EZ80F91AZA50EG Zilog, EZ80F91AZA50EG Datasheet - Page 201

• Manufacturer Part Number: EZ80F91AZA50EG
• Description: IC ACCLAIM MCU 256KB 144LQFP
• Manufacturer: Zilog
• Series: eZ80® AcclaimPlus!™r

Specifications of EZ80F91AZA50EG

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 50MHz
• Connectivity: Ethernet, I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 32
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 144-LQFP
• Processor Series: EZ80F91x
• Core: eZ80
• Data Bus Width: 8 bit
• Data Ram Size: 16 KB
• Interface Type: I2C, IrDA, SPI
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 4
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: eZ80F910300ZCOG
• Minimum Operating Temperature: - 40 C
• For Use With: 269-4712 - KIT DEV ENCORE 32 SERIES269-4671 - BOARD ZDOTS SBC Z80ACCLAIM PLUS269-4561 - KIT DEV FOR EZ80F91 W/C-COMPILER269-4560 - KIT DEV FOR EZ80F91 W/C-COMPILER
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details
• Other names: 269-4563

PS027001-0707
Bit
Position
4
BI
3
FE
2
PE
1
OE
0
DR
Value
0
1
0
1
0
1
0
1
0
1
Description
Receiver does not detect a BREAK condition. This bit is reset
to 0 when the UARTx_LSR register is read.
Receiver detects a BREAK condition on the receive input line.
This bit is 1 if the duration of BREAK condition on the receive
data is longer than one character transmission time, the time
depends on the programming of the UARTx_LSR register. In
case of FIFO only one null character is loaded into the receiver
FIFO with the framing error. The framing error is revealed to
the eZ80 whenever that particular data is read from the
receiver FIFO.
No framing error detected for character at the top of the FIFO.
This bit is reset to 0 when the UARTx_LSR register is read.
Framing error detected for the character at the top of the FIFO.
This bit is set to 1 when the stop bit following the data/parity bit
is logic 0.
The received character at the top of the FIFO does not contain
a parity error. In multidrop mode, this indicates that the
received character is a data byte. This bit is reset to 0 when the
UARTx_LSR register is read.
The received character at the top of the FIFO contains a parity
error. In multidrop mode, this indicates that the received
character is an address byte.
The received character at the top of the FIFO does not contain
an overrun error. This bit is reset to 0 when the UARTx_LSR
register is read.
Overrun error is detected. If the FIFO is not enabled, this
indicates that the data in the receive buffer register was not
read before the next character was transferred into the receiver
buffer register. If the FIFO is enabled, this indicates the FIFO
was already full when an additional character was received by
the receiver shift register. The character in the receiver shift
register is not put into the receiver FIFO.
This bit is reset to 0 when the UARTx_RBR register is read or
all bytes are read from the receiver FIFO.
Data ready. If the FIFO is not enabled, this bit is set to 1 when
a complete incoming character is transferred into the receiver
buffer register from the receiver shift register. If the FIFO is
enabled, this bit is set to 1 when a character is received and
transferred to the receiver FIFO.
Universal Asynchronous Receiver/Transmitter
Product Specification
eZ80F91 ASSP
193