MPC555LFMZP40 Freescale Semiconductor, MPC555LFMZP40 Datasheet - Page 388

• Manufacturer Part Number: MPC555LFMZP40
• Description: IC MCU 32BIT 40MHZ 272-BGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC555LFMZP40

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 40MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 101
• Program Memory Size: 448KB (448K x 8)
• Program Memory Type: FLASH
• Ram Size: 26K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 272-PBGA
• Controller Family/series: POWER 5xx
• Ram Memory Size: 26KB
• Cpu Speed: 63MIPS
• Embedded Interface Type: QSPI, SCI, TouCAN
• Operating Temperature Range: -40°C To +125°C
• No. Of Pins: 272
• Rohs Compliant: No
• Processor Series: MPC5xx
• Core: PowerPC
• Data Bus Width: 32 bit
• Data Ram Size: 26 KB
• Interface Type: CAN, QSPI, SCI
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 101
• Operating Supply Voltage: 3.3 V to 5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: MPC555CMEE
• Minimum Operating Temperature: - 85 C
• On-chip Adc: 10 bit, 32 Channel
• Cpu Family: MPC55xx
• Device Core: PowerPC
• Device Core Size: 32b
• Frequency (max): 40MHz
• Total Internal Ram Size: 32KB
• # I/os (max): 101
• Operating Supply Voltage (typ): 5V
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 272
• Package Type: BGA
• For Use With: MPC555CMEE - KIT EVAL FOR MPC555
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No

11.3 L2U Block Diagram
11.4 Modes Of Operation
MPC555
USER’S MANUAL
Figure 11-1
The L2U Module can operate in the following modes:
• Supports a default global entry for memory space not covered by other regions:
• Interrupt generated upon:
• The PowerPC MSR[DR] bit (data relocate) controls DMPU protection on/off op-
• Programming is done using PowerPC’s mtspr/mfspr instructions to/from imple-
• No protection for accesses to the SRAM module on the L-bus (SRAM has its own
• Normal Mode
• Reset Operation
• Factory Test Mode
• Peripheral Mode
/
eration
mentation specific special purpose registers.
protection options)
— Default access protection
— Default guarded attribute
— Access violation
— Load from guarded region
— Write to read-only region
MPC556
Address
Decode
shows a block diagram of the L-bus to U-bus interface.
Figure 11-1 L2U Bus Interface Block Diagram
Freescale Semiconductor, Inc.
For More Information On This Product,
L-BUS TO U-BUS INTERFACE (L2U)
L-bus Interface
Go to: www.freescale.com
U-bus Interface
Rev. 15 October 2000
Reservation
Control
U-bus
L-bus
DMPU
MOTOROLA
11-2