MPC562MZP56 Freescale Semiconductor, MPC562MZP56 Datasheet - Page 573

IC MPU 32BIT 56MHZ PPC 388-PBGA

MPC562MZP56

Manufacturer Part Number
MPC562MZP56
Description
IC MPU 32BIT 56MHZ PPC 388-PBGA
Manufacturer
Freescale Semiconductor
Series
MPC5xxr
Datasheet

Specifications of MPC562MZP56

Core Processor
PowerPC
Core Size
32-Bit
Speed
56MHz
Connectivity
CAN, EBI/EMI, SCI, SPI, UART/USART
Peripherals
POR, PWM, WDT
Number Of I /o
64
Program Memory Type
ROMless
Ram Size
32K x 8
Voltage - Supply (vcc/vdd)
2.5 V ~ 2.7 V
Data Converters
A/D 32x10b
Oscillator Type
External
Operating Temperature
-40°C ~ 125°C
Package / Case
388-BGA
Processor Series
MPC5xx
Core
PowerPC
Data Bus Width
32 bit
Data Ram Size
8 KB
Interface Type
SCI, SPI, UART
Maximum Clock Frequency
40 MHz
Number Of Programmable I/os
56
Number Of Timers
22
Operating Supply Voltage
2.6 V to 5 V
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
Minimum Operating Temperature
- 40 C
On-chip Adc
2 (10 bit, 32 Channel)
For Use With
MPC564EVB - KIT EVAL FOR MPC561/562/563/564
Lead Free Status / RoHS Status
Request inventory verification / Request inventory verification
Eeprom Size
-
Program Memory Size
-
Lead Free Status / Rohs Status
No

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MPC562MZP56
Manufacturer:
FREESCAL
Quantity:
204
Part Number:
MPC562MZP56
Manufacturer:
Freescale Semiconductor
Quantity:
10 000
Part Number:
MPC562MZP56
Manufacturer:
FREESCALE
Quantity:
20 000
Part Number:
MPC562MZP56
Manufacturer:
FREESCALE
Quantity:
7 699
Company:
Part Number:
MPC562MZP56
Quantity:
1 500
Part Number:
MPC562MZP56R2
Manufacturer:
RFT
Quantity:
1 441
Part Number:
MPC562MZP56R2
Manufacturer:
Freescale Semiconductor
Quantity:
10 000
Freescale Semiconductor
Reset
Field
Addr
Bits
conversions restart with the first CCW entry in queue 2 or the first CCW of the queue 2 sub-queue
being executed when queue 2 was suspended. Alternately, conversions can restart with the aborted
queue 2 CCW entry. The RESUME bit in QACR2 allows the software to select where queue 2
begins after suspension. By choosing to re-execute all of the suspended queue 2 queue and
sub-queue CCWs, all of the samples are guaranteed to have been taken during the same scan pass.
However, a high trigger event rate for queue 1 can prohibit the completion of queue 2. If this
occurs, the software may choose to begin execution of queue 2 with the aborted CCW entry.
Software can change the queue operating mode to disabled mode. Any conversion in progress for
that queue is aborted. Putting a queue into the disabled mode does not power down the converter.
Software can change the queue operating mode to another valid mode. Any conversion in progress
for that queue is aborted. The queue restarts at the beginning of the queue, once an appropriate
trigger event occurs.
For low power operation, software can set the stop mode bit to prepare the module for a loss of
clocks. The QADC64E aborts any conversion in progress when the stop mode is entered.
When the freeze enable bit is set by software and the IMB3 internal FREEZE line is asserted, the
QADC64E freezes at the end of the conversion in progress. When internal FREEZE is negated, the
QADC64E resumes queue execution beginning with the next CCW entry. Refer to
“Configuration and Control Using the IMB3
0:5
6
7
MSB
0
Name
REF
P
1
2
Figure 14-16. Conversion Command Word Table (CCW)
Reserved
Pause. The pause bit allows software to create sub-queues within queue 1 and queue 2.
The QADC64E performs the conversion specified by the CCW with the pause bit set, and
then the queue enters the pause state. Another trigger event causes execution to continue
from the pause to the next CCW.
0 Do not enter the pause state after execution of the current CCW
1 Enter the pause state after execution of the current CCW
NOTE: The pause bit will not cause the queue to pause in the software controlled modes
or external gated modes.
Alternate Reference Enabled. Setting REF high in the CCW enables the use of an alternate
reference.
0 VRH is used as high reference
1 AltRef signal is used as the high reference
3
MPC561/MPC563 Reference Manual, Rev. 1.2
Table 14-19. CCW Bit Descriptions
0x30 4A00 – 0x30 4A7F, 0x30 4E00 – 0x30 4E7F
4
5
P
6
REF
Unaffected
Interface” for more information.
7
Description
IST
8
9
10
QADC64E Enhanced Mode Operation
11
CHAN[6:0]
12
13
Section 14.4.7,
14
LSB
15
14-31

Related parts for MPC562MZP56