ATMEGA88A-MUR Atmel, ATMEGA88A-MUR Datasheet - Page 34

no-image

ATMEGA88A-MUR

Manufacturer Part Number
ATMEGA88A-MUR
Description
IC MCU AVR 8K FLASH 32QFN
Manufacturer
Atmel
Series
AVR® ATmegar
Datasheets

Specifications of ATMEGA88A-MUR

Core Processor
AVR
Core Size
8-Bit
Speed
20MHz
Connectivity
I²C, SPI, UART/USART
Peripherals
Brown-out Detect/Reset, POR, PWM, WDT
Number Of I /o
23
Program Memory Size
8KB (4K x 16)
Program Memory Type
FLASH
Eeprom Size
512 x 8
Ram Size
1K x 8
Voltage - Supply (vcc/vdd)
1.8 V ~ 5.5 V
Data Converters
A/D 8x10b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
32-VQFN Exposed Pad, 32-HVQFN, 32-SQFN, 32-DHVQFN
Lead Free Status / RoHS Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
ATMEGA88A-MUR
Manufacturer:
RENESAS
Quantity:
4 152
8.7
8.8
8271C–AVR–08/10
128 kHz Internal Oscillator
External Clock
When this Oscillator is selected, start-up times are determined by the SUT Fuses as shown in
Table
Table 8-12.
Note:
The 128 kHz internal Oscillator is a low power Oscillator providing a clock of 128 kHz. The fre-
quency is nominal at 3V and 25°C. This clock may be select as the system clock by
programming the CKSEL Fuses to “11” as shown in
Table 8-13.
Note:
When this clock source is selected, start-up times are determined by the SUT Fuses as shown in
Table
Table 8-14.
Note:
To drive the device from an external clock source, XTAL1 should be driven as shown in
8-4. To run the device on an external clock, the CKSEL Fuses must be programmed to “0000”
(see
Table 8-15.
ATmega48A/48PA/88A/88PA/168A/168PA/328/328
Power Conditions
BOD enabled
Fast rising power
Slowly rising power
BOD enabled
Fast rising power
Slowly rising power
Power Conditions
Table
8-12.
8-14.
1. If the RSTDISBL fuse is programmed, this start-up time will be increased to
2.
1. Note that the 128 kHz oscillator is a very low power clock source, and is not designed for high
1. If the RSTDISBL fuse is programmed, this start-up time will be increased to
The device is shipped with this option selected.
8-15).
14CK + 4.1 ms to ensure programming mode can be entered.
accuracy.
14CK + 4.1 ms to ensure programming mode can be entered.
Start-up times for the internal calibrated RC Oscillator clock selection
128 kHz Internal Oscillator Operating Modes
Start-up Times for the 128 kHz Internal Oscillator
Crystal Oscillator Clock Frequency
Nominal Frequency
Frequency
0 - 20 MHz
128 kHz
Start-up Time from Power-
Start-up Time from Power-
down and Power-save
down and Power-save
Reserved
(1)
Reserved
6 CK
6 CK
6 CK
6 CK
6 CK
6 CK
Table
8-13.
Additional Delay from
Additional Delay from
Reset (V
14CK + 65 ms
14CK + 4.1 ms
14CK + 64 ms
14CK + 4 ms
14CK
14CK
Reset
CC
CKSEL3...0
CKSEL3...0
(1)
(1)
= 5.0V)
0011
0000
(2)
SUT1...0
SUT1...0
00
01
10
11
Figure
00
01
10
11
34

Related parts for ATMEGA88A-MUR