PIC24FJ64GB002-I/ML Microchip Technology, PIC24FJ64GB002-I/ML Datasheet

IC MCU 16BIT 64KB FLASH 28QFN

PIC24FJ64GB002-I/ML

Manufacturer Part Number
PIC24FJ64GB002-I/ML
Description
IC MCU 16BIT 64KB FLASH 28QFN
Manufacturer
Microchip Technology
Series
PIC® XLP™ 24Fr

Specifications of PIC24FJ64GB002-I/ML

Program Memory Type
FLASH
Program Memory Size
64KB (22K x 24)
Package / Case
28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
Core Processor
PIC
Core Size
16-Bit
Speed
32MHz
Connectivity
I²C, IrDA, SPI, UART/USART, USB OTG
Peripherals
Brown-out Detect/Reset, LVD, POR, PWM, WDT
Number Of I /o
19
Ram Size
8K x 8
Voltage - Supply (vcc/vdd)
2 V ~ 3.6 V
Data Converters
A/D 9x10b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Processor Series
PIC24FJ
Core
PIC
Data Bus Width
16 bit
Data Ram Size
8 KB
Interface Type
I2C/IrDA/SPI/UART
Maximum Clock Frequency
32 MHz
Number Of Programmable I/os
19
Number Of Timers
5
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
3rd Party Development Tools
52713-733, 52714-737, 53276-922, EWDSPIC
Development Tools By Supplier
PG164130, DV164035, DV244005, DV164005, PG164120, DM240001, DM240011
Minimum Operating Temperature
- 40 C
On-chip Adc
9-ch x 10-bit
Controller Family/series
PIC24
Ram Memory Size
8KB
Cpu Speed
32MHz
No. Of Timers
5
Embedded Interface Type
I2C, LIN, SPI, UART, USB
Rohs Compliant
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
PIC24FJ64GB002-I/ML
Manufacturer:
ANAREN
Quantity:
5 000
The PIC24FJ64GB004 family devices that you have
received conform functionally to the current Device Data
Sheet (DS39940D), except for the anomalies described
in this document.
The silicon issues discussed in the following pages are
for silicon revisions with the Device and Revision IDs
listed in
Table
The errata described in this document will be addressed
in future revisions of the PIC24FJ64GB004 silicon.
Data Sheet clarifications and corrections start on page 7,
following the discussion of silicon issues.
The silicon revision level can be identified using the
current version of MPLAB
programmers, debuggers, and emulation tools, which
are available at the Microchip corporate web site
(www.microchip.com).
TABLE 1:
 2010 Microchip Technology Inc.
PIC24FJ32GB002
PIC24FJ32GB004
PIC24FJ64GB002
PIC24FJ64GB004
Note 1:
Note:
2.
2:
Table
The Device IDs (DEVID and DEVREV) are located at the last two implemented addresses in program
memory. They are shown in hexadecimal in the format “DEVID DEVREV”.
Refer to the “PIC24FJ64GA1/GB0 Families Flash Programming Specification” (DS39934) for detailed
information on Device and Revision IDs for your specific device.
This document summarizes all silicon
errata issues from all revisions of silicon,
previous as well as current. Only the
issues indicated in the last column of
Table 2
revision (A2).
1. The silicon issues are summarized in
SILICON DEVREV VALUES
Silicon Errata and Data Sheet Clarification
Part Number
apply to the current silicon
®
IDE and Microchip’s
PIC24FJ64GB004 Family
PIC24FJ64GB004 FAMILY
Device ID
For example, to identify the silicon revision level using
MPLAB IDE in conjunction with MPLAB ICD 2 or
PICkit™ 3:
1.
2.
3.
4.
The DEVREV values for the various PIC24FJ64GB004
silicon revisions are shown in
4203h
420Bh
4207h
420Fh
Note:
Using the appropriate interface, connect the
device to the MPLAB ICD 2 programmer/
debugger or PICkit™ 3.
From the main menu in MPLAB IDE, select
Configure>Select Device, and then select the
target part number in the dialog box.
Select
(Debugger>Select Tool).
Perform a “Connect” operation to the device
(Debugger>Connect). Depending on the devel-
opment tool used, the part number and Device
Revision ID value appear in the Output window.
(1)
If you are unable to extract the silicon
revision level, please contact your local
Microchip sales office for assistance.
the
MPLAB
Revision ID for Silicon
Table
Revision
hardware
0002h
1.
A2
DS80487F-page 1
(2)
tool

Related parts for PIC24FJ64GB002-I/ML

PIC24FJ64GB002-I/ML Summary of contents

Page 1

... TABLE 1: SILICON DEVREV VALUES Part Number PIC24FJ32GB002 PIC24FJ32GB004 PIC24FJ64GB002 PIC24FJ64GB004 The Device IDs (DEVID and DEVREV) are located at the last two implemented addresses in program Note 1: memory. They are shown in hexadecimal in the format “DEVID DEVREV”. Refer to the “PIC24FJ64GA1/GB0 Families Flash Programming Specification” (DS39934) for detailed 2: information on Device and Revision IDs for your specific device ...

Page 2

... Instruction execution glitches following Doze bit changes. Feature is not functional. Disabled voltage references during Debug mode. External interrupts missed when writing to INTCON2. POSCEN bit does not work with Primary + PLL modes Module continues to draw current when disabled. Affected (1) Revisions  2010 Microchip Technology Inc. ...

Page 3

... A2 X This issue only applies to devices with date codes prior to 1001NNN as identified by the package markings.  2010 Microchip Technology Inc. PIC24FJ64GB004 3. Module: USB While operating in Host mode and attached to a low-speed device through a full-speed USB hub, the PRE signal may not be generated correctly. ...

Page 4

... Instead, use the SPIRBF or SPIBEC flags to track the number of bytes actually transmitted. • If the SPITBF flag must be used, always wait at least one-half SPI clock cycle before writing to the transmit buffer. Affected Silicon Revisions A2 X mode. The  2010 Microchip Technology Inc. ...

Page 5

... Enabling or disabling Doze mode by setting or clearing the DOZEN bit • Before or after changing the DOZE<2:0> bits Affected Silicon Revisions A2 X  2010 Microchip Technology Inc. PIC24FJ64GB004 11. Module: Oscillator (Two-Speed Start-up) , Two-Speed Start-up is not functional. Leaving BG the IESO Configuration bit in its default state ...

Page 6

... AD1PCFG registers, which in turn, affects the state of any port pins with analog inputs. Users should consider the effect on I/O ports and other digital peripherals on those ports when ADC1MD is used for power conservation. Affected Silicon Revisions A2 X  2010 Microchip Technology Inc. is enabled ...

Page 7

... Panasonic ECJ-3YX1C106K Panasonic ECJ-4YB1C106K Murata GRM32DR71C106KA01L Murata GRM31CR61C106KC31L  2010 Microchip Technology Inc. PIC24FJ64GB004 When the regulator is enabled, a low-ESR (< 5Ω) capacitor is required on the V stabilize the voltage regulator output voltage. The V V pin must not be connected to V DDCORE use a capacitor of 10 µF connected to ground. The type can be ceramic or tantalum ...

Page 8

... For example, choose a ceramic capacitor rated at 16V for the 2.5V core voltage. Suggested capacitors are shown in Table 2-1.  2010 Microchip Technology Inc ...

Page 9

... Data in “Typ” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only and are not tested. Note 1: This is the limit to which V can be lowered without losing RAM data  2010 Microchip Technology Inc. PIC24FJ64GB004 29-3. The Standard Operating Conditions: 2.0V to 3.6V (unless otherwise stated) Operating temperature 0°C < T -40° ...

Page 10

... Revised silicon issue 15 (A/D Converter) to reflect updated definition of issues. Added data sheet clarifica- tion issues 1 (Guidelines For Getting Started with 16-Bit Microcontrollers) and 2 (Electrical Characteristics). Rev F Document (11/2010) Revised data sheet clarification issue 2 (Electrical Characteristics). DS80487F-page 10 Converter),  2010 Microchip Technology Inc. ...

Page 11

... PICtail, REAL ICE, rfLAB, Select Mode, Total Endurance, TSHARC, UniWinDriver, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. ...

Page 12

... Philippines - Manila Tel: 63-2-634-9065 Fax: 63-2-634-9069 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 Taiwan - Hsin Chu Tel: 886-3-6578-300 Fax: 886-3-6578-370 Taiwan - Kaohsiung Tel: 886-7-213-7830 Fax: 886-7-330-9305 Taiwan - Taipei Tel: 886-2-2500-6610 Fax: 886-2-2508-0102 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350  2010 Microchip Technology Inc. 08/04/10 ...

Related keywords