DSPIC30F2020-30I/MM Microchip Technology, DSPIC30F2020-30I/MM Datasheet - Page 190

IC DSPIC MCU/DSP 12K 28QFN

DSPIC30F2020-30I/MM

Manufacturer Part Number
DSPIC30F2020-30I/MM
Description
IC DSPIC MCU/DSP 12K 28QFN
Manufacturer
Microchip Technology
Series
dsPIC™ 30Fr

Specifications of DSPIC30F2020-30I/MM

Core Processor
dsPIC
Core Size
16-Bit
Speed
30 MIPs
Connectivity
I²C, IrDA, LIN, SPI, UART/USART
Peripherals
Brown-out Detect/Reset, POR, PWM, WDT
Number Of I /o
21
Program Memory Size
12KB (4K x 24)
Program Memory Type
FLASH
Ram Size
512 x 8
Voltage - Supply (vcc/vdd)
3 V ~ 5.5 V
Data Converters
A/D 8x10b
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
28-QFN
Core Frequency
15MHz
Core Supply Voltage
3.3V
Embedded Interface Type
I2C, SPI, UART
No. Of I/o's
21
Flash Memory Size
12KB
Supply Voltage Range
3V To 3.6V
Package
28QFN-S EP
Device Core
dsPIC
Family Name
dsPIC30
Maximum Speed
30 MHz
Operating Supply Voltage
3.3|5 V
Data Bus Width
16 Bit
Number Of Programmable I/os
21
Interface Type
I2C/SPI/UART
On-chip Adc
8-chx10-bit
Number Of Timers
3
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
DM300023 - KIT DEMO DSPICDEM SMPS BUCKAC164322 - MODULE SOCKET MPLAB PM3 28/44QFNDV164005 - KIT ICD2 SIMPLE SUIT W/USB CABLE
Eeprom Size
-
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
DSPIC30F2020-30I/MMB32
Manufacturer:
Microchip Technology
Quantity:
135
dsPIC30F1010/202X
16.18 Module Power-Down Modes
The module has two internal power modes.
When the ADON bit is ‘1’, the module is in Active mode
and is fully powered and functional.
When ADON is ‘0’, the module is in Off mode. The state
machine for the module is reset, as are all of the
pending conversion requests.
To return to the Active mode from Off mode, the user
must wait for the bias generators to stabilize. The
stabilization time is specified in the electrical specs.
16.19 Effects of a Reset
A device Reset forces all registers to their Reset state.
This forces the ADC module to be turned off, and any
conversion and sampling sequence is aborted. The
value that is in the ADCBUFx register is not modified.
The ADCBUFx registers contain unknown data after a
Power-on Reset.
DS70178C-page 188
Preliminary
16.20 Configuring Analog Port Pins
The use of the ADPCFG and TRIS registers control the
operation of the A/D port pins.
The port pins that are desired as analog inputs should
have their corresponding TRIS bit set (input). If the
TRIS bit is cleared (output), the digital output level (V
or V
Port pins that are desired as analog inputs must have
the corresponding ADPCFG bit clear. This will config-
ure the port to disable the digital input buffer. Analog
levels on pins where ADPCFG<n> = 1, may cause the
digital input buffer to consume excessive current.
If a pin is not configured as an analog input
ADPCFG<n> = 1, the analog input is forced to AVss,
and conversions of that input do not yield meaningful
results.
When reading the PORT register, all pins configured as
analog input ADPCFG<n> = 0 will read ‘0’.
The A/D operation is independent of the state of the
input selection bits and the TRIS bits.
16.21 Output Formats
The A/D converts 10 bits. The data buffer RAM is 16
bits wide. The ADC data can be read in one of two dif-
ferent formats, as shown in Figure 16-5. The FORM bit
selects the format. Each of the output formats
translates to a 16-bit result on the data bus.
OL
) will be converted.
© 2006 Microchip Technology Inc.
OH

Related parts for DSPIC30F2020-30I/MM