AT89C51CC03CA-RLTUM Atmel, AT89C51CC03CA-RLTUM Datasheet - Page 179

• Manufacturer Part Number: AT89C51CC03CA-RLTUM
• Description: IC 8051 MCU 64K FLASH 44-VQFP
• Manufacturer: Atmel
• Series: AT89C CANr

Specifications of AT89C51CC03CA-RLTUM

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: CAN, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 36
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 2K x 8
• Ram Size: 2.25K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Processor Series: AT89x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 2304 B
• Interface Type: UART, SPI
• Maximum Clock Frequency: 60 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 2
• Operating Supply Voltage: 3 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 8 Channel
• Package: 44VQFP
• Device Core: 8051
• Family Name: AT89
• Maximum Speed: 60 MHz
• For Use With: AT89OCD-01 - USB EMULATOR FOR AT8XC51 MCU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Clock Waveforms
This diagram indicates when signals are clocked internally. The time it takes the signals to propagate to the pins, however,
ranges from 25 to 125 ns. This propagation delay is dependent on variables such as temperature and pin loading. Propaga-
tion also varies from output to output and component. Typically though (T
delays are approximately 50ns. The other signals are typically 85 ns. Propagation delays are incorporated in the AC
specifications.
4182O–CAN–09/08
EXTERNAL PROGRAM MEMORY FETCH
READ CYCLE
WRITE CYCLE
PORT OPERATION
SERIAL PORT SHIFT CLOCK
MOV PORT SRC
INTERNAL
MOV DEST PORT (P1. P2. P3)
(INCLUDES INTO. INT1. TO T1)
MOV DEST P0
P2 (EXT)
TXD (MODE 0)
CLOCK
XTAL2
PSEN
ALE
WR
RD
P0
P0
P2
P0
P2
SAMPLED
DATA
STATE4
P1
FLOAT
P2
Valid in normal clock mode. In X2 mode XTAL2 must be changed to XTAL2/2.
STATE5
P1
PCL OUT
INDICATES ADDRESS TRANSITIONS
DPL OR Rt OUT
DPL OR Rt OUT
P0 PINS SAMPLED
P2
P1, P2, P3 PINS SAMPLED
RXD SAMPLED
INDICATES DPH OR P2 SFR TO PCH TRANSITION
INDICATES DPH OR P2 SFR TO PCH TRANSITION
STATE6
P1
OLD DATA NEW DATA
P2
FLOAT
SAMPLED
DATA
STATE1
P1
P2
STATE2
P1
PCL OUT
THESE SIGNALS ARE NOT ACTIVATED DURING THE
EXECUTION OF A MOVX INSTRUCTION
DATA OUT
FLOAT
P2
SAMPLED
DATA
STATE3
P1
A
=25°C fully loaded) RD and WR propagation
P2
FLOAT
P1, P2, P3 PINS SAMPLED
P0 PINS SAMPLED
SAMPLED
DATA
STATE4
P1
PCL OUT (EVEN IF PROGRAM
MEMORY IS INTERNAL)
P2
MEMORY IS EXTERNAL)
RXD SAMPLED
PCL OUT (IF PROGRAM
PCL OUT (IF PROGRAM
MEMORY IS EXTERNAL)
STATE5
P1
AT89C51CC03
PCL OUT
P2
179