LPC3152FET208,551 NXP Semiconductors, LPC3152FET208,551 Datasheet - Page 33

• Manufacturer Part Number: LPC3152FET208,551
• Description: IC ARM9 MCU USB OTG 208TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC3000r

Specifications of LPC3152FET208,551

• Package / Case: 208-TFBGA
• Core Processor: ARM9
• Core Size: 32-Bit
• Speed: 180MHz
• Connectivity: EBI/EMI, I²C, IrDA, MMC, PCM, SPI, UART/USART, USB OTG
• Peripherals: DMA, I²S, LCD, PWM, WDT
• Number Of I /o: 10
• Program Memory Type: ROMless
• Ram Size: 192K x 8
• Voltage - Supply (vcc/vdd): 1.1 V ~ 3.6 V
• Data Converters: A/D 3x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC31
• Core: ARM926EJS
• Data Bus Width: 32 bit
• Data Ram Size: 192 KB
• Interface Type: I2C, I2S, SPI, UART
• Maximum Clock Frequency: 180 MHz
• Number Of Timers: 5
• Operating Supply Voltage: 1.2 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: OM11029
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 935287561551

NXP Semiconductors
LPC3152_3154
Preliminary data sheet
6.26 LCD interface
6.27 I
PCM is a very common method used for transmitting analog data in digital format. Most
common applications of PCM are digital audio as in audio CDs and computers, digital
telephony, and digital videos.
The IOM (ISDN Oriented Modular) interface is primarily used to interconnect
telecommunications ICs providing ISDN compatibility. It delivers a symmetrical full-duplex
communication link containing user data, control/programming lines, and status channels.
The LCD interface contains logic to interface to a 6800 (Motorola) or 8080 (Intel)
compatible LCD controller which supports 4/8/16 bit modes. This module also supports a
serial interface mode. The speed of the interface can be adjusted in software to match the
speed of the connected LCD display.
This module has the following features:
The LPC3152/3154 contains two I
communicating directly with I
connected to support the following analog blocks: Li-ion charger, power supply unit, RTC,
audio ADC, audio DAC, and class AB amplifier.
This module has the following features:
2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C-bus master/slave interface
– PCM (Pulse Code Modulation): Single clocking physical format.
– IOM-2 (Extended ISDN-Oriented modular): Double clocking physical format.
Twelve 8 bit slots in a frame with enabling control per slot.
Internal frame clock generation in master mode.
Receive and transmit DMA handshaking using a request/clear protocol.
Interrupt generation per frame.
4/8/16 bit parallel interface mode: 6800-series, 8080-series.
Serial interface mode.
Supports multiple frequencies for the 6800/8080 bus to support high- and low-speed
controllers.
Supports polling the busy flag from LCD controller to off-load the CPU from polling.
Contains an 16 byte FIFO for sending control and data information to the LCD
controller.
Supports maskable interrupts.
Supports DMA transfers.
I2C0 interface: I
This interface supports functions described in the I
400 kHz. This includes multi-master operation and allows powering off this device in a
working system while leaving the I
I2C1 interface: internally connected to control the functions on the analog die.
Supports normal mode (100 kHz SCL).
All information provided in this document is subject to legal disclaimers.
2
C0 is a standard I
Rev. 0.12 — 27 May 2010
2
C-compatible external devices. I
2
C master/slave interfaces. I
2
C-bus functional.
2
C-compliant bus interface with open-drain pins.
2
C specification for speeds up to
LPC3152/3154
2
2
C-bus 1 is internally
C-bus 0 can be used for
© NXP B.V. 2010. All rights reserved.
33 of 88