ST62T20CB3 STMicroelectronics, ST62T20CB3 Datasheet - Page 31

• Manufacturer Part Number: ST62T20CB3
• Description: IC MCU 8BIT W/ADC 20-PDIP
• Manufacturer: STMicroelectronics
• Series: ST6r

Specifications of ST62T20CB3

• Core Processor: ST6
• Core Size: 8-Bit
• Speed: 8MHz
• Peripherals: LVD, POR, WDT
• Number Of I /o: 12
• Program Memory Size: 4KB (4K x 8)
• Program Memory Type: OTP
• Ram Size: 64 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 6 V
• Data Converters: A/D 8x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 20-DIP (0.300", 7.62mm)
• Processor Series: ST62T2x
• Core: ST6
• Data Bus Width: 8 bit
• Data Ram Size: 64 B
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 12
• Number Of Timers: 1
• Maximum Operating Temperature: + 125 C
• Mounting Style: Through Hole
• Development Tools By Supplier: ST622XC-KIT/110, ST62GP-EMU2, ST62E2XC-EPB/110, ST62E6XC-EPB/US, STREALIZER-II
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit, 8 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

5.11 REGISTER DESCRIPTION
INTERRUPT OPTION REGISTER (IOR)
Address: 0C8h — Write Only
Reset status: 00h
Caution: This register is write-only and cannot be
accessed by single-bit operations (SET, RES,
DEC,...).
Bit 7 =Reserved, must be cleared.
Bit 6 = LES Level/Edge Selection bit.
0: Falling edge sensitive mode is selected for inter-
Table 8. Interrupt Mapping
* Depending on device. See device summary on page 1.
rupt vector #1
Vector #0
Vector #1
Vector #2
Vector #3
Vector #4
7
-
number
Vector
LES
Port A
Port B
TIMER
ESB
RESET
NMI
ADC*
Source
Block
GEN
Reset
Non Maskable Interrupt
Ext. Interrupt Port A
Ext. Interrupt Port B
Timer underflow
End Of Conversion
-
Description
-
NOT USED
-
0
-
Register
ADCR
TSCR
Label
N/A
N/A
N/A
N/A
1: Low level sensitive mode is selected for inter-
Bit 5 = ESB Edge Selection bit.
0: Falling edge mode on interrupt vector #2
1: Rising edge mode on interrupt vector #2
Bit 4 = GEN Global Enable Interrupt.
0: Disable all maskable interrupts
1: Enable all maskable interrupts
Note: When the GEN bit is cleared, the NMI inter-
rupt is active but cannot be used to exit from STOP
or WAIT modes.
Bits 3:0 = Reserved, must be cleared.
rupt vector #1
ST6208C/ST6209C/ST6210C/ST6220C
EOC
Flag
TMZ
N/A
N/A
N/A
N/A
STOP
from
Exit
yes
yes
yes
yes
yes
no
FFCh-FFDh
FFAh-FFBh
FFEh-FFFh
FF8h-FF9h
FF6h-FF7h
FF4h-FF5h
FF2h-FF3h
FF0h-FF1h
Address
Vector
Priority
Highest
Priority
Lowest
Priority
Order
31/104
1