MC908LJ24CFUER Freescale Semiconductor, MC908LJ24CFUER Datasheet - Page 106

• Manufacturer Part Number: MC908LJ24CFUER
• Description: IC MCU 24K FLASH 8MHZ SPI 64-QFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC908LJ24CFUER

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: I²C, IRSCI, SPI
• Peripherals: LCD, LVD, POR, PWM
• Number Of I /o: 40
• Program Memory Size: 24KB (24K x 8)
• Program Memory Type: FLASH
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-QFP
• Processor Series: HC08LJ
• Core: HC08
• Data Bus Width: 8 bit
• Data Ram Size: 768 B
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 48
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: FSICEBASE, M68EML08LJLKE, ZK-HC08LX-A, M68CBL05CE
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 6 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Oscillator (OSC)
7.5.1 Crystal Amplifier Input Pin (OSC1)
7.5.2 Crystal Amplifier Output Pin (OSC2)
7.5.3 Oscillator Enable Signal (SIMOSCEN)
7.5.4 Internal RC Clock (ICLK)
7.5.5 CGM Oscillator Clock (CGMXCLK)
7.5.6 CGM Reference Clock (CGMRCLK)
7.6 Low Power Modes
Data Sheet
106
OSC1 pin is an input to the crystal oscillator amplifier. Schmitt trigger and
glitch filter are implemented on this pin to improve EMC performance.
See
glitch filter.
OSC2 pin is the output of the crystal oscillator inverting amplifier.
The SIMOSCEN signal from the system integration module (SIM)
enables/disables the x-tal oscillator circuit.
The ICLK clock is the output from the internal RC oscillator. This clock
drives the SIM and COP modules.
The CGMXCLK clock is the output from the x-tal oscillator. This clock
drives to CGM, real time clock module, analog-to-digital converter, liquid
crystal display driver module, and other MCU sub-systems.
This is buffered signal of CGMXCLK, it is used by the CGM as the
phase-locked-loop (PLL) reference clock.
The WAIT and STOP instructions put the MCU in low-power
consumption standby modes.
Section 24. Electrical Specifications
Oscillator (OSC)
MC68HC908LJ24/LK24 — Rev. 2.1
for detail specification of the
Freescale Semiconductor