R5F21334CNFP#U0 Renesas Electronics America, R5F21334CNFP#U0 Datasheet - Page 191

MCU 1KB FLASH 16K ROM 32-LQFP

R5F21334CNFP#U0

Manufacturer Part Number
R5F21334CNFP#U0
Description
MCU 1KB FLASH 16K ROM 32-LQFP
Manufacturer
Renesas Electronics America
Series
R8C/3x/33Cr
Datasheet

Specifications of R5F21334CNFP#U0

Core Processor
R8C
Core Size
16/32-Bit
Speed
20MHz
Connectivity
I²C, LIN, SIO, SSU, UART/USART
Peripherals
POR, PWM, Voltage Detect, WDT
Number Of I /o
27
Program Memory Size
16KB (16K x 8)
Program Memory Type
FLASH
Ram Size
1.5K x 8
Voltage - Supply (vcc/vdd)
1.8 V ~ 5.5 V
Data Converters
A/D 12x10b; D/A 2x8b
Oscillator Type
Internal
Operating Temperature
-20°C ~ 85°C
Package / Case
32-LQFP
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
R5F21334CNFP#U0
Manufacturer:
Renesas Electronics America
Quantity:
135
Company:
Part Number:
R5F21334CNFP#U0R5F21334CNFP#V2
Manufacturer:
RENESAS
Quantity:
5 600
Company:
Part Number:
R5F21334CNFP#U0R5F21334CNFP#V2
Manufacturer:
Renesas Electronics America
Quantity:
10 000
Company:
Part Number:
R5F21334CNFP#U0R5F21334CNFP#X6
Manufacturer:
Renesas Electronics America
Quantity:
10 000
R8C/33C Group
REJ09B0570-0100 Rev.1.00 Dec. 14, 2009
Page 161 of 589
12.3
12.4
Table 12.2
Note:
ALeRASE
Other than ALeRASE ALeRASE
This function is used in standard serial I/O mode. When the ID codes sent from the serial programmer or the on-
chip debugging emulator are “ALeRASE” in ASCII code, the content of the user ROM area will be erased at once.
However, if the contents of the ID code addresses are set to other than “ALeRASE” (other than Table 12.1 ID
Code Reserved Word) when the ROMCR bit in the OFS register is set to 1 and the ROMCP1 bit is set to 0 (ROM
code protect enabled), forced erasure is not executed and the ID codes are checked with the ID code check function.
Table 12.2 lists the Conditions and Operations of Forced Erase Function.
Also, when the contents of the ID code addresses are set to “ALeRASE” in ASCII code, if the ID codes sent from
the serial programmer or the on-chip debugging emulator are “ALeRASE”, the content of the user ROM area will
be erased. If the ID codes sent from the serial programmer are other than “ALeRASE”, the ID codes do not match
and no command is acknowledged, thus the user ROM area remains protected.
This function is used in standard serial I/O mode. When the I/D codes in the ID code storage addresses are set to the
reserved character sequence of the ASCII codes “Protect” (refer to Table 12.1 ID Code Reserved Word),
communication with the serial programmer or the on-chip debugging emulator is not performed. This does not
allow the flash memory to be read, rewritten, or erased using the serial programmer or the on-chip debugging
emulator.
Also, if the ID codes are also set to the reserved character sequence of the ASCII codes “Protect” when the
ROMCR bit in the OFS register is set to 1 and the ROMCP1 bit is set to 0 (ROM code protect enabled), ROM code
protection cannot be disabled using the serial programmer or the on-chip debugging emulator. This prevents the
flash memory from being read, rewritten, or erased using the serial programmer, the on-chip debugging emulator,
or parallel programmer.
ID code from serial
programmer or the
on-chip debugging
1. For “Protect”, refer to 12.4 Standard Serial I/O Mode Disabled Function .
emulator
Forced Erase Function
Standard Serial I/O Mode Disabled Function
Conditions and Operations of Forced Erase Function
ALeRASE
Other than ALeRASE
Other than ALeRASE
ID code storage
ID code in
address
Condition
(1)
(1)
Other than 01b
(ROM code protect disabled)
01b
(ROM code protect enabled)
Bits ROMCP1 and
in OFS register
ROMCR
All erasure of user ROM
area (forced erase function)
ID code check
(ID code check function)
ID code check
(ID code check function.
No ID code match.)
ID code check
(ID code check function)
Operation
12. ID Code Areas

Related parts for R5F21334CNFP#U0