R5F21334CNFP#U0 Renesas Electronics America, R5F21334CNFP#U0 Datasheet - Page 221

MCU 1KB FLASH 16K ROM 32-LQFP

R5F21334CNFP#U0

Manufacturer Part Number
R5F21334CNFP#U0
Description
MCU 1KB FLASH 16K ROM 32-LQFP
Manufacturer
Renesas Electronics America
Series
R8C/3x/33Cr
Datasheet

Specifications of R5F21334CNFP#U0

Core Processor
R8C
Core Size
16/32-Bit
Speed
20MHz
Connectivity
I²C, LIN, SIO, SSU, UART/USART
Peripherals
POR, PWM, Voltage Detect, WDT
Number Of I /o
27
Program Memory Size
16KB (16K x 8)
Program Memory Type
FLASH
Ram Size
1.5K x 8
Voltage - Supply (vcc/vdd)
1.8 V ~ 5.5 V
Data Converters
A/D 12x10b; D/A 2x8b
Oscillator Type
Internal
Operating Temperature
-20°C ~ 85°C
Package / Case
32-LQFP
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
R5F21334CNFP#U0
Manufacturer:
Renesas Electronics America
Quantity:
135
Company:
Part Number:
R5F21334CNFP#U0R5F21334CNFP#V2
Manufacturer:
RENESAS
Quantity:
5 600
Company:
Part Number:
R5F21334CNFP#U0R5F21334CNFP#V2
Manufacturer:
Renesas Electronics America
Quantity:
10 000
Company:
Part Number:
R5F21334CNFP#U0R5F21334CNFP#X6
Manufacturer:
Renesas Electronics America
Quantity:
10 000
R8C/33C Group
REJ09B0570-0100 Rev.1.00 Dec. 14, 2009
Page 191 of 589
Figure 15.10
15.3.6
15.3.7
When the CHNE bit in the DTCCRj (j = 0 to 22) register is 1 (chain transfers enabled), multiple data transfers
can be continuously performed by one activation source. Figure 15.10 shows a Flow of Chain Transfers.
When the DTC is activated, one control data is selected according to the data read from the DTC vector address
corresponding to the activation source, and the selected control data is read from the DTC control data area.
When the CHNE bit for the control data is 1 (chain transfers enabled), the next control data immediately
following the current control data is read and transferred after the current transfer is completed. This operation
is repeated until the data transfer with the control data for which the CHNE bit is 0 (chain transfers disabled) is
completed.
Set the CHNE bit in the DTCCR23 register to 0 (chain transfers disabled).
When the data transfer causing the DTCCTj (j = 0 to 23) register value to change to 0 is performed in normal
mode, and when the data transfer causing the DTCCTj register value to change to 0 is performed while the
RPTINT bit in the DTCCRj register is 1 (interrupt generation enabled) in repeat mode, the interrupt request
corresponding to the activation source is generated for the CPU during DTC operation. However, no interrupt
request is generated for the CPU when the activation source is SSU/I
status.
Interrupt requests for the CPU are affected by the I flag or interrupt control register. In chain transfers, whether
the interrupt request is generated or not is determined either by the number of transfer times specified for the
first type of the transfer or the RPTINT bit. When an interrupt request is generated for the CPU, the bit among
bits DTCENi0 to DTCENi7 in the DTCENi (i = 0 to 3, 5, 6) registers corresponding to the activation source are
set to 0 (activation disabled).
Chain Transfers
Interrupt Sources
Flow of Chain Transfers
CHNE: Bit in DTCCRj register
DTC control data area
Control data 1
Control data 2
CHNE = 1
CHNE = 0
Write back control data 1
Write back control data 2
DTC activation source
End of DTC transfers
Read control data 1
Read control data 2
Read DTC vector
Transfer data
Data transfer
generation
2
C bus transmit data empty or flash ready
15. DTC

Related parts for R5F21334CNFP#U0