R5F21334CNFP#U0 Renesas Electronics America, R5F21334CNFP#U0 Datasheet - Page 548

• Manufacturer Part Number: R5F21334CNFP#U0
• Description: MCU 1KB FLASH 16K ROM 32-LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/3x/33Cr

Specifications of R5F21334CNFP#U0

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, PWM, Voltage Detect, WDT
• Number Of I /o: 27
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 32-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/33C Group
REJ09B0570-0100 Rev.1.00 Dec. 14, 2009
Page 518 of 589
30.4.12 Full Status Check
Table 30.6
Note:
1
1
0
FST Register Status
1. When FFh is written in the second bus cycle of these commands, the MCU enters read array mode.
FST5
If an error occurs, bits FST4 and FST5 in the FST register are set to 1, indicating the occurrence of an error. The
execution result can be confirmed by checking these status bits (full status check).
Table 30.6 lists the Errors and FST Register Status. Figure 30.16 shows the Full Status Check and Handling
Procedure for Individual Errors.
At the same time, the command code written in the first bus cycle is invalid.
1
0
1
Errors and FST Register Status
FST4
Command sequence
error
Erase error
Blank check error
Program error/
lock bit program error
Error
When the block erase command is executed, but auto-
• When a command is not written correctly.
• When data other than valid data (i.e., D0h or FFh) is
• The erase command is executed during suspend
• The command is executed to the block during suspend
erasure does not complete correctly.
When the block blank check command is executed and
data other than blank data FFh is read.
When the program command is executed, but auto-
programming does not complete correctly.
written in the second bus cycle of the block erase
command
(1)
.
Error Occurrence Condition
30. Flash Memory