HD64F3644PV Renesas Electronics America, HD64F3644PV Datasheet - Page 342

• Manufacturer Part Number: HD64F3644PV
• Description: IC H8/3644 MCU FLASH 32K 64SDIP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Lr

Specifications of HD64F3644PV

• Core Processor: H8/300L
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI
• Peripherals: PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 64-SDIP (0.750", 19.05mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Section 10 Serial Communication Interface
SCI3 operates as follows when receiving data.
SCI3 monitors the communication line, and when it detects a 0 start bit, performs internal
synchronization and begins reception. Reception is carried out in accordance with the relevant data
transfer format in table 10.14. The received data is first placed in RSR in LSB-to-MSB order, and
then the parity bit and stop bit(s) are received. SCI3 then carries out the following checks.
Rev. 6.00 Sep 12, 2006 page 320 of 526
REJ09B0326-0600
4
Parity check
SCI3 checks that the number of 1 bits in the receive data conforms to the parity (odd or even)
set in bit PM in the serial mode register (SMR).
Stop bit check
SCI3 checks that the stop bit is 1. If two stop bits are used, only the first is checked.
Status check
SCI3 checks that bit RDRF is set to 1, indicating that the receive data can be transferred from
RSR to RDR.
Clear bits OER, PER,
Figure 10.13 Example of Data Reception Flowchart (Asynchronous Mode) (cont)
FER to 0 in SSR
error processing
error processing
End of receive
Start receive
No
No
No
OER = 1?
PER = 1?
FER = 1?
Yes
Yes
Yes
Parity error
processing
Framing error
Overrun error
processing
processing
Break?
No
Yes
(A)
4.
If a receive error has
occurred, read bits OER,
PER, and FER in SSR to
identify the error, and after
carrying out the necessary
error processing, ensure
that bits OER, PER, and
FER are all cleared to 0.
Reception cannot be
resumed if any of these
bits is set to 1. In the case
of a framing error, a break
can be detected by reading
the value of the RXD pin.