MC68HC711E9MFNE2 Freescale Semiconductor, MC68HC711E9MFNE2 Datasheet - Page 21

• Manufacturer Part Number: MC68HC711E9MFNE2
• Description: IC MCU 8BIT 512BYTES ROM 52-PLCC
• Manufacturer: Freescale Semiconductor
• Series: HC11r

Specifications of MC68HC711E9MFNE2

• Core Processor: HC11
• Core Size: 8-Bit
• Speed: 2MHz
• Connectivity: SCI, SPI
• Peripherals: POR, WDT
• Number Of I /o: 38
• Program Memory Size: 12KB (12K x 8)
• Program Memory Type: OTP
• Eeprom Size: 512 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 52-PLCC
• Processor Series: HC711E
• Core: HC11
• Data Bus Width: 8 bit
• Data Ram Size: 512 B
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 2 MHz
• Number Of Programmable I/os: 38
• Number Of Timers: 8
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

1.4.1 V
Power is supplied to the MCU through V
operates from a single 5-volt (nominal) power supply. Low-voltage devices in the E series operate at
3.0–5.5 volts.
Very fast signal transitions occur on the MCU pins. The short rise and fall times place high, short duration
current demands on the power supply. To prevent noise problems, provide good power supply bypassing
at the MCU. Also, use bypass capacitors that have good
high-frequency characteristics and situate them as close to the MCU as possible. Bypass requirements
vary, depending on how heavily the MCU pins are loaded.
Freescale Semiconductor
DD
and V
OPTIONAL POWER-ON DELAY AND MANUAL RESET SWITCH
RESET SWITCH
MANUAL
SS
4.7 kΩ
Figure 1-8. External Reset Circuit with Delay
V DD
Figure 1-7. External Reset Circuit
M68HC11E Family Data Sheet, Rev. 5.1
4.7 k Ω
1.0 µF
MC34(0/1)64
GND
V DD
IN
DD
2
3
RESET
and V
MC34164
GND
IN
1
RESET
SS
V DD
. V
4.7 kΩ
DD
is the power supply, V
MC34064
TO RESET
OF M68HC11
GND
V DD
IN
RESET
V DD
4.7 kΩ
SS
is ground. The MCU
TO RESET
OF M68HC11
Pin Descriptions
21