HD64F2638F20J Renesas Electronics America, HD64F2638F20J Datasheet - Page 503

• Manufacturer Part Number: HD64F2638F20J
• Description: IC H8S MCU FLASH 256K 128-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2600r

Specifications of HD64F2638F20J

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: CAN, SCI, SmartCard
• Peripherals: Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 128-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

H8S/2639, H8S/2638, H8S/2636,
H8S/2630, H8S/2635 Group
Bit 5—Parity Enable (PE): In asynchronous mode, selects whether or not parity bit addition is
performed in transmission, and parity bit checking in reception. In clocked synchronous mode
with a multiprocessor format, parity bit addition and checking is not performed, regardless of the
PE bit setting.
Bit 5
PE
0
1
Note:* When the PE bit is set to 1, the parity (even or odd) specified by the O/E bit is added to
Bit 4—Parity Mode (O/E): Selects either even or odd parity for use in parity addition and
checking.
The O/E bit setting is only valid when the PE bit is set to 1, enabling parity bit addition and
checking, in asynchronous mode. The O/E bit setting is invalid in clocked synchronous mode,
when parity addition and checking is disabled in asynchronous mode, and when a multiprocessor
format is used.
Bit 4
O/E
0
1
Notes: 1. When even parity is set, parity bit addition is performed in transmission so that the total
REJ09B0103-0800 Rev. 8.00
May 28, 2010
transmit data before transmission. In reception, the parity bit is checked for the parity (even
or odd) specified by the O/E bit.
2 When odd parity is set, parity bit addition is performed in transmission so that the total
number of 1 bits in the transmit character plus the parity bit is even.
In reception, a check is performed to see if the total number of 1 bits in the receive
character plus the parity bit is even.
number of 1 bits in the transmit character plus the parity bit is odd.
In reception, a check is performed to see if the total number of 1 bits in the receive
character plus the parity bit is odd.
Description
Parity bit addition and checking disabled
Parity bit addition and checking enabled *
Description
Even parity *
Odd parity *
2
1
Section 13 Serial Communication Interface (SCI)
(Initial value)
(Initial value)
Page 453 of 1458