HD64F2638F20J Renesas Electronics America, HD64F2638F20J Datasheet - Page 716

• Manufacturer Part Number: HD64F2638F20J
• Description: IC H8S MCU FLASH 256K 128-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2600r

Specifications of HD64F2638F20J

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: CAN, SCI, SmartCard
• Peripherals: Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 128-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 16 Controller Area Network (HCAN)
• Mailbox transmit/receive settings
• Mailbox (RAM) initialization
Page 666 of 1458
Each channel has one receive-only mailbox (mailbox 0) plus 15 mailboxes that can be set for
reception. Thus a total of 32 mailboxes can be used for reception. To set a mailbox for
reception, set the corresponding bit to 1 in the mailbox configuration register (MBCR). The
initial setting for mailboxes is 0, designating transmission use. Refer to Mailbox
Transmit/Receive Settings in 16.3.2, Initialization after Hardware Reset, for details.
As message control/data registers (MCx[x], MDx[x]) are configured in RAM, their initial
values after powering on are undefined, and so bit initialization is necessary. Write 0s or 1s to
the mailboxes. See Mailbox (Message Control/Data (MCx[x], MDx[x]) Initial Setting in
16.3.2, Initialization after a Hardware Reset, for details.
H8S/2639, H8S/2638, H8S/2636,
REJ09B0103-0800 Rev. 8.00
H8S/2630, H8S/2635 Group
May 28, 2010