MC68HC705B16CFN Freescale Semiconductor, MC68HC705B16CFN Datasheet - Page 227
Manufacturer Part Number
IC MCU 2.1MHZ 15K OTP 52-PLCC
Specifications of MC68HC705B16CFN
Number Of I /o
Program Memory Size
15KB (15K x 8)
Program Memory Type
256 x 8
352 x 8
Voltage - Supply (vcc/vdd)
4.5 V ~ 5.5 V
-40°C ~ 85°C
Package / Case
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
(1) This register is implemented in EEPROM; therefore reset has no effect on the individual bits.
PCPD — Port C pull-down
This bit, when programmed, connects a resistive pull-down on each pin of port C. This pull-down,
EE1P – EEPROM protect bit
In order to achieve a higher degree of protection, the EEPROM is effectively split into two parts,
both working from the VPP1 charge pump. Part 1 of the EEPROM array (32 bytes from $0100 to
$011F) cannot be protected; part 2 (224 bytes from $0120 to $01FF) is protected by the EE1P bit
in the options register.
When this bit is set to 1 (erased), the protection will remain until the next power-on or external
reset. EE1P can only be written to ‘0’ when the E1LAT bit in the EEPROM control register is set.
SEC — Secure bit
This bit allows the EPROM and EEPROM1 to be secured from external access. When this bit is
in the erased state (set), the EPROM and EEPROM1 content is not secured and the device may
be used in non user mode. When the SEC bit is programmed to ‘zero’, the EPROM and EEPROM1
content is secured by prohibiting entry to the non user mode. To deactivate the secure bit, the
EPROM has to be erased by exposure to a high density ultraviolet light, and the device has to be
entered into the EPROM erase verification mode with PD1 set. When the SEC bit is changed, its
new value will have no effect until the next power-on or external reset.
, is active on a given pin only while it is an input.
0 (clear) –
0 (clear) –
The EEPROM1 protect function is disabled while in bootstrap mode.
EEPROM options register (OPTR)
Part 2 of the EEPROM array is not protected; all 256 bytes of
EEPROM can be accessed for any read, erase or programming
Part 2 of the EEPROM array is protected; any attempt to erase or
program a location will be unsuccessful.
EEPROM/EPROM not protected.
SEC Not affected