MC68HC705B16CFN Freescale Semiconductor, MC68HC705B16CFN Datasheet - Page 70
Manufacturer Part Number
IC MCU 2.1MHZ 15K OTP 52-PLCC
Specifications of MC68HC705B16CFN
Number Of I /o
Program Memory Size
15KB (15K x 8)
Program Memory Type
256 x 8
352 x 8
Voltage - Supply (vcc/vdd)
4.5 V ~ 5.5 V
-40°C ~ 85°C
Package / Case
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
When the MCU enters STOP mode, the timer counter stops counting and remains at that
particular count value until STOP mode is exited by an interrupt. If STOP mode is exited by
power-on or external reset, the counter is forced to $FFFC but if it is exited by external interrupt
(IRQ) then the counter resumes from its stopped value.
Another feature of the programmable timer is that if at least one valid input capture edge occurs
at one of the TCAP pins while in STOP mode, the corresponding input capture detect circuitry is
armed. This action does not wake the MCU or set any timer flags, but when the MCU does
wake-up there will be an active input capture flag (and data) from that first valid edge which
occurred during STOP mode.
If STOP mode is exited by an external reset then no such input capture flag or data action takes
place even if there was a valid input capture edge (at one of the TCAP pins) during STOP mode.
The timer system is not affected by WAIT mode and continues normal operation. Any valid timer
interrupt will wake-up the system.
The relationships between the internal clock signals, the counter contents and the status of the
flag bits are shown in the following figures. It should be noted that the signals labelled ‘internal’
(processor clock, timer clocks and reset) are not available to the user.
Timer during STOP mode
Timer during WAIT mode
Timer state diagrams