MMC2107CFCPV33 Freescale Semiconductor, MMC2107CFCPV33 Datasheet - Page 276

• Manufacturer Part Number: MMC2107CFCPV33
• Description: IC MCU 33MHZ 128K FLASH 144-LQFP
• Manufacturer: Freescale Semiconductor
• Series: MCorer

Specifications of MMC2107CFCPV33

• Core Processor: M210
• Core Size: 32-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• Data Bus Width: 32 bit
• Data Ram Size: 8 KB
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 33 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 4 bit
• Operating Supply Voltage: 0 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No RoHS Version Available

Watchdog Timer Module
Technical Data
276
NOTE:
DBG — Debug Mode Bit
Changing the DBG bit from 1 to 0 during debug mode starts the
watchdog timer. Changing the DBG bit from 0 to 1 during debug mode
stops the watchdog timer.
EN — Watchdog Enable Bit
The read-always, write-once DBG bit controls the function of the
watchdog timer in debug mode. Once written, the DBG bit is not
affected by further writes except in debug mode.
During debug mode, watchdog timer registers can be written and read
normally. When debug mode is exited, timer operation continues from
the state it was in before entering debug mode, but any updates made
in debug mode remain. If a write-once register is written for the first
time in debug mode, the register is still writable when debug mode is
exited.
The read-always, write-once EN bit enables the watchdog timer.
Once written, the EN bit is not affected by further writes except in
debug mode. When the watchdog timer is disabled, the watchdog
counter and prescaler counter are held in a stopped state.
Freescale Semiconductor, Inc.
For More Information On This Product,
1 = Watchdog timer stopped in debug mode
0 = Watchdog timer not affected in debug mode
1 = Watchdog timer enabled
0 = Watchdog timer disabled
Go to: www.freescale.com
Watchdog Timer Module
MMC2107 – Rev. 2.0
MOTOROLA