MMC2107CFCPV33 Freescale Semiconductor, MMC2107CFCPV33 Datasheet - Page 310

• Manufacturer Part Number: MMC2107CFCPV33
• Description: IC MCU 33MHZ 128K FLASH 144-LQFP
• Manufacturer: Freescale Semiconductor
• Series: MCorer

Specifications of MMC2107CFCPV33

• Core Processor: M210
• Core Size: 32-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• Data Bus Width: 32 bit
• Data Ram Size: 8 KB
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 33 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 4 bit
• Operating Supply Voltage: 0 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No RoHS Version Available

Timer Modules (TIM1 and TIM2)
15.7.11 Timer System Control Register 2
Technical Data
310
NOTE:
Address: TIM1 — 0x00ce_000d
Reset:
Read: Anytime
Write: Anytime
TOI — Timer Overflow Interrupt Enable Bit
PUPT — Timer Pullup Enable Bit
RDPT — Timer Drive Reduction Bit
TCRE — Timer Counter Reset Enable Bit
When the timer channel 3 registers contain $0000 and TCRE is set, the
timer counter registers remain at $0000 all the time.
Read:
Write:
TOI enables timer overflow interrupt requests.
PUPT enables pullup resistors on the timer ports when the ports are
configured as inputs.
RDPT reduces the output driver size.
TCRE enables a counter reset after a channel 3 compare.
Freescale Semiconductor, Inc.
Figure 15-14. Timer System Control Register 2 (TIMSCR2)
For More Information On This Product,
1 = Overflow interrupt requests enabled
0 = Overflow interrupt requests disabled
1 = Pullup resistors enabled
0 = Pullup resistors disabled
1 = Output drive reduction enabled
0 = Output drive reduction disabled
1 = Counter reset enabled
0 = Counter reset disabled
TIM2 — 0x00cf_000d
Bit 7
TOI
0
Timer Modules (TIM1 and TIM2)
Go to: www.freescale.com
= Writes have no effect and the access terminates without a transfer error exception.
6
0
0
PUPT
5
0
RDPT
4
0
TCRE
3
0
PR2
2
0
MMC2107 – Rev. 2.0
PR1
1
0
MOTOROLA
Bit 0
PR0
0