MC68HC16Z1CFC16 Freescale Semiconductor, MC68HC16Z1CFC16 Datasheet - Page 109

• Manufacturer Part Number: MC68HC16Z1CFC16
• Description: IC MPU 1K RAM 16MHZ 132-PQFP
• Manufacturer: Freescale Semiconductor
• Series: HC16r

Specifications of MC68HC16Z1CFC16

• Core Processor: CPU16
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: EBI/EMI, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Type: ROMless
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 132-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -

5.2.2 Interrupt Arbitration
5.2.3 Show Internal Cycles
5.2.4 Register Access
5.2.5 Freeze Operation
M68HC16 Z SERIES
USER’S MANUAL
Each module that can request interrupts has an interrupt arbitration (IARB) field. Arbi-
tration between interrupt requests of the same priority is performed by serial conten-
tion between IARB field bit values. Contention will take place whenever an interrupt
request is acknowledged, even when there is only a single request pending. For an
interrupt to be serviced, the appropriate IARB field must have a non-zero value. If an
interrupt request from a module with an IARB field value of %0000 is recognized, the
CPU16 processes a spurious interrupt exception.
Because the SIM routes external interrupt requests to the CPU16, the SIM IARB field
value is used for arbitration between internal and external interrupts of the same pri-
ority. The reset value of IARB for the SIM is %1111, and the reset IARB value for all
other modules is %0000, which prevents SIM interrupts from being discarded during
initialization. Refer to
A show cycle allows internal bus transfers to be monitored externally. The SHEN field
in SIMCR determines what the external bus interface does during internal transfer op-
erations.
arbitration can occur. Refer to
M68HC16 Z-series MCUs always operate at the supervisor level. The state of the
SUPV bit has no meaning.
The FREEZE signal halts MCU operations during debugging. FREEZE is asserted in-
ternally by the CPU16 if a breakpoint occurs while background mode is enabled. When
FREEZE is asserted, only the bus monitor, software watchdog, and periodic interrupt
timer are affected. The halt monitor and spurious interrupt monitor continue to operate
normally. Setting the freeze bus monitor (FRZBM) bit in SIMCR disables the bus mon-
itor when FREEZE is asserted. Setting the freeze software watchdog (FRZSW) bit dis-
ables the software watchdog and the periodic interrupt timer when FREEZE is
asserted.
Table 5-1
SHEN[1:0]
shows whether data is driven externally, and whether external bus
00
01
10
11
Freescale Semiconductor, Inc.
5.8 Interrupts
For More Information On This Product,
Table 5-1 Show Cycle Enable Bits
SYSTEM INTEGRATION MODULE
Show cycles disabled, external arbitration enabled
Show cycles enabled, external arbitration disabled
Show cycles enabled, external arbitration enabled
Show cycles enabled, external arbitration enabled;
internal activity is halted by a bus grant
Go to: www.freescale.com
5.6.6.1 Show Cycles
for a discussion of interrupt arbitration.
Action
for more information.
5-3