MPC564MZP66 Freescale Semiconductor, MPC564MZP66 Datasheet - Page 259

• Manufacturer Part Number: MPC564MZP66
• Description: IC MCU 512K FLASH 66MHZ 388-BGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC564MZP66

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 56
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 388-BGA
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Refer to
6.1.7
The time base (TB) is a 64-bit free-running binary counter defined by the MPC500 architecture. The TB
has two independent reference registers which can generate a maskable interrupt when the time base
counter reaches the value programmed in one of the two reference registers. The period of the TB depends
on the driving frequency. The TB is clocked by the TMBCLK clock. The period for the TB is:
The state of TB is not affected by any resets and should be initialized by software. Reads and writes of the
TB are restricted to special instructions. Separate special-purpose registers are defined in the MPC500
architecture for reading and writing the TB. For the MPC561/MPC563 implementation, it is not possible
to read or write the entire TB in a single instruction. Therefore, the mttb and mftb instructions are used to
move the lower half of the time base (TBL) while the mttbu and mftbu instructions are used to move the
upper half (TBU).
Two reference registers are associated with the time base: TBREF0 and TBREF1. A maskable interrupt is
generated when the TB count reaches to the value programmed in one of the two reference registers. Two
status bits in the time base control and status register (TBSCR) indicate which one of the two reference
registers generated the interrupt.
Refer to
Refer to
additional information.
6.1.8
The RTC is a 32-bit counter and pre-divider used to provide a time-of-day indication to the operating
system and application software as show in
Freescale Semiconductor
Section 3.9.5, “Decrementer Register
Section 6.2.2.4, “System Timer
Section 3.9.4, “Time Base Facility (TB) —
Time Base (TB)
Real-Time Clock (RTC)
99
999
9999
999999
9999999
99999999
999999999
(hex) FFFFFFFF
Count Value
Table 6-6. Decrementer Time-Out Periods (continued)
MPC561/MPC563 Reference Manual, Rev. 1.2
Registers,” for diagrams and bit descriptions of TB registers.
Figure
Time-Out @ 4 MHz
T TB
(DEC),” for more information.
10.0 ms
100.0 s
100 µs
1.0 ms
1000 s
4295 s
10.0 s
=
6-7. It is clocked by the PITRTCLK clock. The counter
1.0 s
----------------------------- -
F TMBCLK
OEA,” and to the RCPU Reference Manual for
2
64
Time-Out @ 20 MHz
200 ms
200 µs
200 s
20 µs
859 s
2 ms
2.0 s
20 s
System Configuration and Protection
6-19