MPC564MZP66 Freescale Semiconductor, MPC564MZP66 Datasheet - Page 505

• Manufacturer Part Number: MPC564MZP66
• Description: IC MCU 512K FLASH 66MHZ 388-BGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC564MZP66

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 56
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 388-BGA
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

and the pause flag is not set. The QADC64E sets the completion flag and the queue status becomes idle.
Examples of this situation are:
13.5.4
The QADC64E queuing mechanism allows the application to utilize different requirements for
automatically scanning input channels.
In single-scan mode, a single pass through a sequence of conversions defined by a queue is performed. In
continuous-scan mode, multiple passes through a sequence of conversions defined by a queue are
executed. The possible modes are:
The following paragraphs describe single-scan and continuous-scan operations.
13.5.4.1
When the disabled mode is selected, the queue is not active. Trigger events cannot initiate queue execution.
When both queue 1 and queue 2 are disabled, wait states are not encountered for IMB3 accesses of the
RAM. When both queues are disabled, it is safe to change the QCLK prescaler values.
13.5.4.2
Reserved mode allows for future mode definitions. When the reserved mode is selected, the queue is not
active. It functions the same as disabled mode.
Freescale Semiconductor
•
•
•
•
•
The pause bit is set in CCW10 and EOQ is programmed into CCW10
During queue 1 operation, the pause bit set in CCW32, which is also BQ2
Disabled and reserved mode
Single-scan modes
— Software initiated single-scan mode
— External trigger single-scan mode
— External gated single-scan mode
— Periodic/Interval timer single-scan mode
Continuous-scan modes
— Software initiated continuous-scan mode
— External trigger continuous-scan mode
— External gated continuous-scan mode
— Periodic/Interval timer continuous-scan mode
Scan Modes
Disabled Mode
Reserved Mode
Do not use a reserved mode. Unspecified operations may result.
MPC561/MPC563 Reference Manual, Rev. 1.2
CAUTION
QADC64E Legacy Mode Operation
13-41