MPC564MZP66 Freescale Semiconductor, MPC564MZP66 Datasheet - Page 765

• Manufacturer Part Number: MPC564MZP66
• Description: IC MCU 512K FLASH 66MHZ 388-BGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC564MZP66

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 56
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 388-BGA
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

17.9.3.5
Output compare mode (either OCA or OCB) is selected by setting MODE[0:3] to 0b010x. The MODE0
controls the activation criteria for the FLAG line, (i.e., when a compare occurs only on channel B or when
a compare occurs on either channel).
This mode allows the MDASM to perform four different output functions:
In this mode the leading and trailing edges of variable width output pulses are generated by calculated
output compare events occurring on channels A and B, respectively. OC mode may also be used to perform
a single output compare function, or may be used as an output port bit.
In this mode, channel B is accessed via register B2. A write to register B2 writes the same value to register
B1 even though the contents of B1 are not used in this mode. Both channels work together to generate one
‘single shot’ output pulse signal. Channel A defines the leading edge of the output pulse, while channel B
defines the trailing edge of the pulse. FLAG line activation can be done when a match occurs on channel
B only or when a compare occurs on either channel (as defined by the MODE0 in the MDASMSCR
register).
When this mode is first selected, (i.e., coming from disable mode, both comparators are disabled). Each
comparator is enabled by writing to its data register; it remains enabled until the next successful
comparison is made on that channel, whereupon it is disabled. The values stored in registers A and B are
compared with the count value on the selected 16-bit counter bus when their corresponding comparators
are enabled.
Freescale Semiconductor
•
•
•
•
Counter Bus
Mode selection; EDPOL = 0 (Channel A capture on rising edge)
Input signal
Internal Register, not accessible to software
Register B1
16-bit
Register B2
Register A
FLAG bit
(Ignored)
Single-shot output pulse (two edges), with FLAG line activated on the second edge
Single-shot output pulse (two edges), with FLAG line activated on both edges
Single-shot output transition (one edge)
Output port signal, with output compare function disabled
Output Compare (OCB and OCAB) Modes
0x0500
0xxxxx
0xxxxx
0xxxxx
Edge Trigger
Figure 17-18. MDASM Input Capture Example
Flag set
Rising
0x1000
MPC561/MPC563 Reference Manual, Rev. 1.2
0x1000
0x1000
0xxxxx
FLAG reset
by software
0x1000
0x1100
0x1000
0xxxxx
Edge Trigger
0x1400
0x1400
0x1000
Flag set
0x1400
Rising
FLAG reset
by software
Modular Input/Output Subsystem (MIOS14)
0x1400
0x1400
0x1000
0x1525
Flag set
Edge Trigger
0x16A0
0x16A0
0x1400
FLAG reset
by software
Rising
0x16A0
17-33