MPC564MZP66 Freescale Semiconductor, MPC564MZP66 Datasheet - Page 771

no-image

MPC564MZP66

Manufacturer Part Number
MPC564MZP66
Description
IC MCU 512K FLASH 66MHZ 388-BGA
Manufacturer
Freescale Semiconductor
Series
MPC5xxr
Datasheets

Specifications of MPC564MZP66

Core Processor
PowerPC
Core Size
32-Bit
Speed
66MHz
Connectivity
CAN, EBI/EMI, SCI, SPI, UART/USART
Peripherals
POR, PWM, WDT
Number Of I /o
56
Program Memory Size
512KB (512K x 8)
Program Memory Type
FLASH
Ram Size
32K x 8
Voltage - Supply (vcc/vdd)
2.5 V ~ 2.7 V
Data Converters
A/D 32x10b
Oscillator Type
External
Operating Temperature
-40°C ~ 125°C
Package / Case
388-BGA
For Use With
MPC564EVB - KIT EVAL FOR MPC561/562/563/564
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Eeprom Size
-

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MPC564MZP66
Manufacturer:
FREESCALE
Quantity:
2 000
Part Number:
MPC564MZP66
Manufacturer:
Freescale Semiconductor
Quantity:
10 000
Part Number:
MPC564MZP66
Manufacturer:
FREESCALE
Quantity:
2 000
Part Number:
MPC564MZP66R2
Manufacturer:
Freescale Semiconductor
Quantity:
10 000
In the OPWM mode, the WOR bit selects whether the output is totem pole driven or open-drain.
17.9.4
17.9.5
When the reset signal is asserted, the MDASM registers are reset according to the values specified in
Section 17.9.6, “MDASM
17.9.6
The privilege level to access the MDASM registers depends on the MIOS14MCR[SUPV]. The privilege
level is unrestricted after reset and can be changed to supervisor by software.
17.9.6.1
The MDASM register map comprises four 16-bit register locations. As shown in below, the register block
contains four MDASM registers. Note that the MDASMSCRD is the duplication of the MDASMSCR.
This is done to allow 32-bit aligned accesses.
All unused bits return zero when read by the software. All register addresses in this section are specified
as offsets from the base address of the MDASM.
Freescale Semiconductor
The MDASM is connected to all the signals in the read/write and control bus, to allow data transfer
from and to the MDASM registers, and to control the MDASM in the different possible situations.
The MDASM is connected to four 16-bit counter buses available to that submodule instance, so
that the MDASM can select by software which one to use.
The MDASM uses the request bus to transmit the FLAG line to the interrupt request submodule
(MIRSM).
Modular I/O Bus (MIOB) Interface
Effect of RESET on MDASM
MDASM Registers
MDASM Registers Organization
The user should not write directly to the address of the MDASMSCRD. This
register’s address may be reserved for future use and should not be accessed
by the software to ensure future software compatibility.
0x30 6058
0x30 605A
Address
Registers.”
MDASM11 Data A Register (MDASMAR)
See
descriptions.
MDASM11 Data B Register (MDASMBR)
See
descriptions.
MPC561/MPC563 Reference Manual, Rev. 1.2
Section 17.9.6.2, “MDASM Data A (MDASMAR)
Section 17.9.6.3, “MDASM Data B (MDASMBR)
Table 17-18. MDASM Address Map
WARNING
MDASM11
Register
Modular Input/Output Subsystem (MIOS14)
Register” for bit
Register” for bit
17-39

Related parts for MPC564MZP66