MPC564MZP66 Freescale Semiconductor, MPC564MZP66 Datasheet - Page 922

• Manufacturer Part Number: MPC564MZP66
• Description: IC MCU 512K FLASH 66MHZ 388-BGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC564MZP66

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 56
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 388-BGA
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Development Support
software, by setting the corresponding software trap enable bit, or on the fly using the serial interface
implemented in the development port to set the corresponding development port trap enable bit.
External breakpoints can be generated by any of the peripherals of the system, including those found on
the MPC561/MPC563 or externally, and also by an external development system. Peripherals found on the
external bus use the serial interface of the development port to assert the external breakpoint.
In the RCPU, as in other RISC processors, saving/restoring machine state on the stack during exception
handling, is done mostly in software. When the software is in the middle of saving/restoring machine state,
MSR[RI] is cleared. Exceptions that occur and that are handled by the RCPU when MSR[RI] is clear result
in a non-restartable machine state. For more information refer to
Section 3.13.4,
“Exceptions.”
In general, breakpoints are recognized in the RCPU is only when MSR[RI] is set, which guarantees
machine restartability after a breakpoint. In this working mode breakpoints are said to be masked. There
are cases when it is desired to enable breakpoints even when MSR[RI] is clear, with the possible risk of
causing a non-restartable machine state. Therefore internal breakpoints have also a programmable
non-masked mode, and an external development system can also choose to assert a non-maskable external
breakpoint.
Watchpoints are not masked and therefore always reported on the external pins, regardless of the value of
MSR[RI]. The counters, although counting watchpoints, are part of the internal breakpoints logic and
therefore are not decremented when the RCPU is operating in the masked mode and MSR[RI] is clear.
Figure 23-1
shows the watchpoint and breakpoint support of the RCPU.
MPC561/MPC563 Reference Manual, Rev. 1.2
23-8
Freescale Semiconductor